Hi David:
It's better to add a cover-letter, and add changes note for new version,
such as:
changes since v0:
- split patch to two patches or more, one patch for one new feature (Heiko)
and NOT to have two same signed-off-by
? 11/12/2015 22:33, David Wu ??:
> The calc_divs of new version is different form the old.
> The time of tHD;sda, tHD;sda, tSU;sta, tHD;sta and tSU;sto
> could be configured by RKI2C_CON register.
> So it need a new way to calc_divs for new i2c controller.
>
> Signed-off-by: David Wu <wdc at rock-chips.com>
> Signed-off-by: David Wu <david.wu at rock-chips.com>
> ---
>
> drivers/i2c/busses/i2c-rk3x.c | 54 ++++++++++++++++++++++++++++++++++---------
> 1 file changed, 43 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
> index c1935eb..0ff299f 100644
> --- a/drivers/i2c/busses/i2c-rk3x.c
> +++ b/drivers/i2c/busses/i2c-rk3x.c
> @@ -58,6 +58,12 @@ enum {
> #define REG_CON_LASTACK BIT(5) /* 1: send NACK after last received byte */
> #define REG_CON_ACTACK BIT(6) /* 1: stop if NACK is received */
>
> +#define VERSION_MASK 0xffff0000
> +#define VERSION_SHIFT 16
> +
> +#define RK3X_I2C_V0 0x0
> +#define RK3X_I2C_V1 0x1
> +
> /* REG_MRXADDR bits */
> #define REG_MRXADDR_VALID(x) BIT(24 + (x)) /* [x*8+7:x*8] of MRX[R]ADDR valid */
>
> @@ -90,10 +96,22 @@ struct rk3x_i2c_soc_data {
> int grf_offset;
> };
>
> +struct rk3x_i2c_ops {
> + int (*calc_divs)(unsigned long,
> + unsigned long,
> + unsigned long,
> + unsigned long,
> + unsigned long,
> + unsigned long *,
> + unsigned long *,
> + unsigned int *);
> +};
> +
> struct rk3x_i2c {
> struct i2c_adapter adap;
> struct device *dev;
> struct rk3x_i2c_soc_data *soc_data;
> + struct rk3x_i2c_ops ops;
>
> /* Hardware resources */
> void __iomem *regs;
> @@ -116,6 +134,7 @@ struct rk3x_i2c {
> u8 addr;
> unsigned int mode;
> bool is_last_msg;
> + unsigned int time_con;
>
> /* I2C state machine */
> enum rk3x_i2c_state state;
> @@ -151,7 +170,8 @@ static void rk3x_i2c_start(struct rk3x_i2c *i2c)
> i2c_writel(i2c, REG_INT_START, REG_IEN);
>
> /* enable adapter with correct mode, send START condition */
> - val = REG_CON_EN | REG_CON_MOD(i2c->mode) | REG_CON_START;
> + val = i2c->time_con | REG_CON_EN | REG_CON_MOD(i2c->mode)
> + | REG_CON_START;
>
> /* if we want to react to NACK, set ACTACK bit */
> if (!(i2c->msg->flags & I2C_M_IGNORE_NAK))
> @@ -443,16 +463,19 @@ out:
> * @sda_fall_ns: How many ns it takes for SDA to fall.
> * @div_low: Divider output for low
> * @div_high: Divider output for high
> + * @con: version0 is not used
> *
> * Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case
> * a best-effort divider value is returned in divs. If the target rate is
> * too high, we silently use the highest possible rate.
> */
> -static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate,
> - unsigned long scl_rise_ns,
> - unsigned long scl_fall_ns,
> - unsigned long sda_fall_ns,
> - unsigned long *div_low, unsigned long *div_high)
> +static int rk3x_i2c_v0_calc_divs(unsigned long clk_rate, unsigned long scl_rate,
> + unsigned long scl_rise_ns,
> + unsigned long scl_fall_ns,
> + unsigned long sda_fall_ns,
> + unsigned long *div_low,
> + unsigned long *div_high,
> + unsigned int *con)
> {
> unsigned long spec_min_low_ns, spec_min_high_ns;
> unsigned long spec_setup_start, spec_max_data_hold_ns;
> @@ -616,17 +639,19 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate,
>
> static void rk3x_i2c_adapt_div(struct rk3x_i2c *i2c, unsigned long clk_rate)
> {
> + unsigned int con = 0;
> unsigned long div_low, div_high;
> u64 t_low_ns, t_high_ns;
> int ret;
>
> - ret = rk3x_i2c_calc_divs(clk_rate, i2c->scl_frequency, i2c->scl_rise_ns,
> + ret = i2c->ops.calc_divs(clk_rate, i2c->scl_frequency, i2c->scl_rise_ns,
> i2c->scl_fall_ns, i2c->sda_fall_ns,
> - &div_low, &div_high);
> + &div_low, &div_high, &con);
> WARN_ONCE(ret != 0, "Could not reach SCL freq %u", i2c->scl_frequency);
>
> clk_enable(i2c->clk);
> i2c_writel(i2c, (div_high << 16) | (div_low & 0xffff), REG_CLKDIV);
> + i2c->time_con = con;
> clk_disable(i2c->clk);
>
> t_low_ns = div_u64(((u64)div_low + 1) * 8 * 1000000000, clk_rate);
> @@ -661,13 +686,14 @@ static int rk3x_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long
> struct clk_notifier_data *ndata = data;
> struct rk3x_i2c *i2c = container_of(nb, struct rk3x_i2c, clk_rate_nb);
> unsigned long div_low, div_high;
> + unsigned int con = 0;
>
> switch (event) {
> case PRE_RATE_CHANGE:
> - if (rk3x_i2c_calc_divs(ndata->new_rate, i2c->scl_frequency,
> + if (i2c->ops.calc_divs(ndata->new_rate, i2c->scl_frequency,
> i2c->scl_rise_ns, i2c->scl_fall_ns,
> i2c->sda_fall_ns,
> - &div_low, &div_high) != 0)
> + &div_low, &div_high, &con) != 0)
> return NOTIFY_STOP;
>
> /* scale up */
> @@ -816,7 +842,8 @@ static int rk3x_i2c_xfer(struct i2c_adapter *adap,
>
> /* Force a STOP condition without interrupt */
> i2c_writel(i2c, 0, REG_IEN);
> - i2c_writel(i2c, REG_CON_EN | REG_CON_STOP, REG_CON);
> + i2c_writel(i2c, i2c->time_con | REG_CON_EN |
> + REG_CON_STOP, REG_CON);
>
> i2c->state = STATE_IDLE;
>
> @@ -871,6 +898,7 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
> u32 value;
> int irq;
> unsigned long clk_rate;
> + unsigned int version;
>
> i2c = devm_kzalloc(&pdev->dev, sizeof(struct rk3x_i2c), GFP_KERNEL);
> if (!i2c)
> @@ -983,6 +1011,10 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, i2c);
>
> + version = (readl(i2c->regs + REG_CON) & VERSION_MASK) >> VERSION_SHIFT;
> + if (version == RK3X_I2C_V0)
> + i2c->ops.calc_divs = rk3x_i2c_v0_calc_divs;
> +
> ret = clk_prepare(i2c->clk);
> if (ret < 0) {
> dev_err(&pdev->dev, "Could not prepare clock\n");
>
--
****************************************************************************
???
Fuzhou Rockchip Electronics Co., Ltd
????????????????89????A?21??
ADDR: No.21 bldg, Fuzhou Software Park,Fuzhou,Fujian,P.R.China
Email: xjq at rock-chips.com
****************************************************************************
????????????????????????????????????
??????????????????????????? ????????
????????????????????????????????????
????????????????????????????????????
??????????????????????
IMPORTANT NOTICE: This email is from Fuzhou Rockchip Electronics Co.,
Ltd .The contents of this email and any attachments may contain
information that is privileged, confidential and/or exempt from
disclosure under applicable law and relevant NDA. If you are not the
intended recipient, you are hereby notified that any disclosure,
copying, distribution, or use of the information is STRICTLY PROHIBITED.
Please immediately contact the sender as soon as possible and destroy
the material in its entirety in any format. Thank you.
****************************************************************************
