On 2015/8/27 16:57, Heiko Stuebner wrote:
> Hi Shawn,
>
>
> you're loosing the original author. Your can override the patch-author (away
> from the mail sender) via a "From:" line at the top of the commit message,
> like:
>
Woops.... sorry for missing this bit. Thanks for pointing out that. :)
Patch 1 is from Boojin, and patch 2,3 attribute to Addy(Actually I
rebase it for linux-next from v3.14). patch 4 and 5 comes from myself.
It will be fixed from the next ones if any.
> ------
> From: Boojin Kim <boojin.kim at samsung.com>
>
> This patch adds to support burst mode for dev-to-mem and
> mem-to-dev transmit.
> ...
> ------
>
>
>> This patch adds to support burst mode for dev-to-mem and
>> mem-to-dev transmit.
>>
>> Signed-off-by: Boojin Kim <boojin.kim at samsung.com>
>> Signed-off-by: Addy Ke <addy.ke at rock-chips.com>
>> Signed-off-by: Shawn Lin <shawn.lin at rock-chips.com>
>> cc: Heiko Stuebner <heiko at sntech.de>
>> cc: Doug Anderson <dianders at chromium.org>
>> cc: Olof Johansson <olofj at google.com>
>> Reviewed-and-tested-by: Sonny Rao <sonnyrao at chromium.org>
>>
>> ---
>>
>> drivers/dma/pl330.c | 18 ++++++++++++------
>> 1 file changed, 12 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
>> index ecab4ea0..0d544d2 100644
>> --- a/drivers/dma/pl330.c
>> +++ b/drivers/dma/pl330.c
>> @@ -1141,10 +1141,13 @@ static inline int _ldst_devtomem(unsigned dry_run,
>> u8 buf[], const struct _xfer_spec *pxs, int cyc)
>> {
>> int off = 0;
>> + enum pl330_cond cond;
>> +
>> + cond = (pxs->desc->rqcfg.brst_len == 1) ? SINGLE : BURST;
>>
>> while (cyc--) {
>> - off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
>> - off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
>> + off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri);
>> + off += _emit_LDP(dry_run, &buf[off], cond, pxs->desc->peri);
>> off += _emit_ST(dry_run, &buf[off], ALWAYS);
>> off += _emit_FLUSHP(dry_run, &buf[off], pxs->desc->peri);
>> }
>> @@ -1156,11 +1159,14 @@ static inline int _ldst_memtodev(unsigned dry_run,
>> u8 buf[], const struct _xfer_spec *pxs, int cyc)
>> {
>> int off = 0;
>> + enum pl330_cond cond;
>> +
>> + cond = (pxs->desc->rqcfg.brst_len == 1) ? SINGLE : BURST;
>>
>> while (cyc--) {
>> - off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
>> + off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri);
>> off += _emit_LD(dry_run, &buf[off], ALWAYS);
>> - off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
>> + off += _emit_STP(dry_run, &buf[off], cond, pxs->desc->peri);
>> off += _emit_FLUSHP(dry_run, &buf[off], pxs->desc->peri);
>> }
>>
>> @@ -2557,7 +2563,7 @@ static struct dma_async_tx_descriptor
>> *pl330_prep_dma_cyclic(
>>
>> desc->rqtype = direction;
>> desc->rqcfg.brst_size = pch->burst_sz;
>> - desc->rqcfg.brst_len = 1;
>> + desc->rqcfg.brst_len = pch->burst_len;
>> desc->bytes_requested = period_len;
>> fill_px(&desc->px, dst, src, period_len);
>>
>> @@ -2702,7 +2708,7 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct
>> scatterlist *sgl, }
>>
>> desc->rqcfg.brst_size = pch->burst_sz;
>> - desc->rqcfg.brst_len = 1;
>> + desc->rqcfg.brst_len = pch->burst_len;
>> desc->rqtype = direction;
>> desc->bytes_requested = sg_dma_len(sg);
>> }
>
>
>
>
--
Best Regards
Shawn Lin
