[RESEND PATCH] clk: rockchip: disable init state before mmc card initialization

[heiko@xxxxxxxxx (Heiko Stuebner)]

Hi Shawn,

Am Montag, 24. August 2015, 16:27:43 schrieb Shawn Lin:
> mmc host controller's IO input/output timing is unpredictable if
> bootloader execute tuning for HS200 mode. It might make kernel failed
> to initialize mmc card in identification mode. The root cause is
> tuning phase and degree setting for HS200 mode in bootloader aren't
> applicable to that of identification mode in kernel stage. Anyway, we
> can't force all bootloaders to disable tuning phase and degree setting
> before into kernel. Simply disable it in rockchip_clk_register_mmc.
> 
> Signed-off-by: Shawn Lin <shawn.lin at rock-chips.com>
> 
> ---
> 
>  drivers/clk/rockchip/clk-mmc-phase.c | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/drivers/clk/rockchip/clk-mmc-phase.c
> b/drivers/clk/rockchip/clk-mmc-phase.c index e9f8df32..ae21592 100644
> --- a/drivers/clk/rockchip/clk-mmc-phase.c
> +++ b/drivers/clk/rockchip/clk-mmc-phase.c
> @@ -38,6 +38,9 @@ static unsigned long rockchip_mmc_recalc(struct clk_hw
> *hw, #define ROCKCHIP_MMC_DEGREE_MASK 0x3
>  #define ROCKCHIP_MMC_DELAYNUM_OFFSET 2
>  #define ROCKCHIP_MMC_DELAYNUM_MASK (0xff << ROCKCHIP_MMC_DELAYNUM_OFFSET)
> +#define ROCKCHIP_MMC_INIT_STATE_DISABLE (0x1)
> +#define ROCKCHIP_MMC_INIT_STATE_SHIFT (1)
> +#define ROCKCHIP_MMC_INIT_STATE_MASK  (0x1)

you don't need the "()" around primitive values. Also I don't think you need 
the second MASK attribute, doing
	writel(HIWORD_UPDATE(ROCKCHIP_MMC_INIT_STATE_DISABLE,
				     ROCKCHIP_MMC_INIT_STATE_DISABLE,
				     mmc_clock->shift),

should be enough. And thirdly I'm undecided about the naming of the constant. 
The manual describes the init_state as "Assert init_state to soft reset the 
CLKGEN.", so I guess I'd prefer

	ROCKCHIP_MMC_INIT_STATE_RESET

or so

> 
>  #define PSECS_PER_SEC 1000000000000LL
> 
> @@ -119,6 +122,21 @@ static const struct clk_ops rockchip_mmc_clk_ops = {
>  	.set_phase	= rockchip_mmc_set_phase,
>  };
> 
> +static void rockchip_clk_mmc_disable_init(struct rockchip_mmc_clock

I guess similar to the thoughts above, simply name this
	rockchip_clk_mmc_reset()

or alternatively just do the reset in rockchip_clk_register_mmc directly:

if (mmc_clock->shift == ROCKCHIP_MMC_INIT_STATE_SHIFT))
	writel(HIWORD_UPDATE(ROCKCHIP_MMC_INIT_STATE_DISABLE,
				     ROCKCHIP_MMC_INIT_STATE_MASK,
			     mmc_clock->shift),
	       mmc_clock->reg);

as the pr_debug does not really serve a purpose.


Heiko

> *mmc_clock) +{
> +	if (mmc_clock->shift != ROCKCHIP_MMC_INIT_STATE_SHIFT)
> +		return;
> +
> +	writel(HIWORD_UPDATE(ROCKCHIP_MMC_INIT_STATE_DISABLE,
> +			     ROCKCHIP_MMC_INIT_STATE_MASK,
> +			     mmc_clock->shift),
> +	       mmc_clock->reg);
> +
> +	pr_debug("%s: clear mmc init state to %d", __func__,
> +		 (readl(mmc_clock->reg) >> (mmc_clock->shift)) &
> +		 ROCKCHIP_MMC_INIT_STATE_MASK);
> +}
> +
>  struct clk *rockchip_clk_register_mmc(const char *name,
>  				const char *const *parent_names, u8 num_parents,
>  				void __iomem *reg, int shift)
> @@ -139,6 +157,8 @@ struct clk *rockchip_clk_register_mmc(const char *name,
>  	mmc_clock->reg = reg;
>  	mmc_clock->shift = shift;
> 
> +	rockchip_clk_mmc_disable_init(mmc_clock);
> +
>  	if (name)
>  		init.name = name;