[PATCH v7 3/5] ARM: dts: add RK3xxx CPU Thermal data

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Caesar,

On Sun, Sep 28, 2014 at 3:38 AM, Caesar Wang <caesar.wang at rock-chips.com> wrote:
> This patch changes a dtsi file to contain the thermal data
> on RK3288 and later SoCs. This data will
> enable a thermal shutdown over 125C.
>
> Signed-off-by: Caesar Wang <caesar.wang at rock-chips.com>
> ---
>  arch/arm/boot/dts/rk3xxx-cpu-thermal.dtsi | 32 +++++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
>  create mode 100644 arch/arm/boot/dts/rk3xxx-cpu-thermal.dtsi

I haven't done lots of review of this series, but I did notice that
this file has bad spacing.  It's fairly obvious in your gerrit patch
<https://chromium-review.googlesource.com/#/c/220270/1/arch/arm/boot/dts/rk3xxx-cpu-thermal.dtsi>
because gerrit (by default) shows you "tab" characters...

In general you should use tab for indentation, not spaces.  You seem
to use a mix of the two.

-Doug



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux