Hi Philipp:
On 2014?11?27? 00:23, Philipp Zabel wrote:
> Am Mittwoch, den 26.11.2014, 21:33 +0800 schrieb Andy Yan:
>> some platform may not support all the display mode,
>> add mode_valid interface check it
>>
>> also add drm_connector_register which add a debugfs
>> interface for dump display modes and edid information
>>
>> Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
>> ---
>>
>> Changes in v13: None
>> Changes in v12: None
>> Changes in v11: None
>> Changes in v10: None
>> Changes in v9: None
>> Changes in v8: None
>> Changes in v7: None
>> Changes in v6: None
>> Changes in v5: None
>> Changes in v4: None
>> Changes in v3: None
>>
>> drivers/gpu/drm/bridge/dw_hdmi.c | 17 +++++++++++++++++
>> include/drm/bridge/dw_hdmi.h | 2 ++
>> 2 files changed, 19 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw_hdmi.c
>> index 5e88c8d..b13e782 100644
>> --- a/drivers/gpu/drm/bridge/dw_hdmi.c
>> +++ b/drivers/gpu/drm/bridge/dw_hdmi.c
>> @@ -1406,6 +1406,20 @@ static int dw_hdmi_connector_get_modes(struct drm_connector *connector)
>> return 0;
>> }
>>
>> +static enum drm_mode_status
>> +dw_hdmi_connector_mode_valid(struct drm_connector *connector,
>> + struct drm_display_mode *mode)
>> +{
>> + struct dw_hdmi *hdmi = container_of(connector,
>> + struct dw_hdmi, connector);
>> + enum drm_mode_status mode_status = MODE_OK;
>> +
>> + if (hdmi->plat_data->mode_valid)
>> + mode_status = hdmi->plat_data->mode_valid(connector, mode);
>> +
>> + return mode_status;
>> +}
>> +
>> static struct drm_encoder *dw_hdmi_connector_best_encoder(struct drm_connector
>> *connector)
>> {
>> @@ -1430,6 +1444,7 @@ static struct drm_connector_funcs dw_hdmi_connector_funcs = {
>>
>> static struct drm_connector_helper_funcs dw_hdmi_connector_helper_funcs = {
>> .get_modes = dw_hdmi_connector_get_modes,
>> + .mode_valid = dw_hdmi_connector_mode_valid,
>> .best_encoder = dw_hdmi_connector_best_encoder,
>> };
>>
>> @@ -1631,6 +1646,8 @@ int dw_hdmi_bind(struct device *dev, struct device *master,
>>
>> dev_set_drvdata(dev, hdmi);
>>
>> + drm_connector_register(&hdmi->connector);
>> +
> This is not right, the connector is registered by the imx-drm core in
> the drm_driver .load callback.
Sorry, I didn't found imx-drm core has did that before.And I found many
connector drivers register it by itself.
This will be removed in next patch.
> regards
> Philipp
>
>
>
>
