Hi all, here is v2 of this series. On the functional side, adding the support for USB mux groups is probably the biggest change. Most other changes are mostly cosmetic (typos, function names, documentation, ...). More detailed changelogs are included with the respective patches. Regarding DT, I separated pinconf from pinmux nodes and updated documentation accordingly to enforce that separation. The parser, though, still handles everything in order to not break backwards compatibility. And finally, as Linus requested, I patched one of the Qualcomm drivers to use the features added in 'pinctrl: pinconf-generic: Allow driver to specify DT params'. I don't have that HW so, that is compile tested only and may take some more work to work on HW. So much for the changes. What didn't change? I left the parts that have been described as "kludgy" as they were, in order to maintain backwards compatibility and not break current users of pinconf-generic functionality. The audience is again limited to pinctrl stakeholders. Thanks, S?ren Soren Brinkmann (7): pinctrl: pinconf-generic: Infer map type from DT property pinctrl: pinconf-generic: Allow driver to specify DT params pinctrl: zynq: Document DT binding pinctrl: Add driver for Zynq ARM: zynq: Enable pinctrl ARM: zynq: DT: Add pinctrl information pinctrl: qcom-spmi-gpio: Migrate to pinconf-generic .../bindings/pinctrl/xlnx,zynq-pinctrl.txt | 104 ++ arch/arm/boot/dts/zynq-7000.dtsi | 8 +- arch/arm/boot/dts/zynq-zc702.dts | 181 +++ arch/arm/boot/dts/zynq-zc706.dts | 152 +++ arch/arm/mach-zynq/Kconfig | 2 + drivers/pinctrl/Kconfig | 8 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/nomadik/pinctrl-abx500.c | 2 +- drivers/pinctrl/pinconf-generic.c | 199 ++-- drivers/pinctrl/pinconf.c | 4 +- drivers/pinctrl/pinconf.h | 22 +- drivers/pinctrl/pinctrl-rockchip.c | 2 +- drivers/pinctrl/pinctrl-tz1090-pdc.c | 2 +- drivers/pinctrl/pinctrl-tz1090.c | 2 +- drivers/pinctrl/pinctrl-zynq.c | 1176 ++++++++++++++++++++ drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 125 +-- drivers/pinctrl/sh-pfc/pinctrl.c | 2 +- include/linux/pinctrl/pinconf-generic.h | 25 + include/linux/pinctrl/pinctrl.h | 9 + 19 files changed, 1804 insertions(+), 222 deletions(-) create mode 100644 Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt create mode 100644 drivers/pinctrl/pinctrl-zynq.c -- 2.1.3.1.ge241007
