Hi David, Am Mittwoch, 31. Dezember 2014, 19:15:38 schrieb David Miller: > From: Roger Chen <roger.chen at rock-chips.com> > Date: Mon, 29 Dec 2014 17:42:32 +0800 > > > Roger Chen (6): > > patch1: add driver for Rockchip RK3288 SoCs integrated GMAC > > patch2: define clock ID used for GMAC > > patch3: modify CRU config for Rockchip RK3288 SoCs integrated GMAC > > patch4: dts: rockchip: add gmac info for rk3288 > > patch5: dts: rockchip: enable gmac on RK3288 evb board > > patch6: add document for Rockchip RK3288 GMAC > > > > Tested on rk3288 evb board: > > Execute the following command to enable ethernet, > > set local IP and ping a remote host. > > > > busybox ifconfig eth0 up > > busybox ifconfig eth0 192.168.1.111 > > ping 192.168.1.1 > > Series applied to net-next, thanks. could we split this up a bit instead? If everything goes through your tree, we'll end up with a lot of conflicts with other pending stuff, so I'd really appreciate if you could leave out patches patch2: define clock ID used for GMAC patch3: modify CRU config for Rockchip RK3288 SoCs integrated GMAC patch4: dts: rockchip: add gmac info for rk3288 patch5: dts: rockchip: enable gmac on RK3288 evb board so only take the driver itself and the dt-binding and I would take these 4 above through the appropriate trees (clk and arm-soc) Thanks and happy new year Heiko
