On 14/03/2025 at 19:56:29 +01, Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx> wrote: > From: Clément Léger <clement.leger@xxxxxxxxxxx> > > The EB board (Expansion board) supports both RZ/N1D and RZ-N1S. Since this > configuration targets only the RZ/N1D, it is named r9a06g032-rzn1d400-eb. > It adds support for the 2 additional switch ports (port C and D) that are > available on that board. > > Signed-off-by: Clément Léger <clement.leger@xxxxxxxxxxx> > > [Thomas moved the dts to the renesas directory and declared the leds in > each phy] While you do a new iteration, I'd suggest rewording this to: Signed-off-by: Clément Léger <clement.leger@xxxxxxxxxxx> [Thomas: move the DTS to the Renesas directory, declare the PHY LEDs] Signed-off-by: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx> Cheers, Miquèl
