This series adds support for the temperature sensor unit (TSU) found on the
Renesas RZ/G3E SoC.
The series consists of 5 patches (one of which is not related to the thermal
framework) that progressively add TSU support as follows:
- patch 1/5: adds syscon/regmap support for accessing system controller
registers, enabling access to TSU calibration values
- patches 2-5/5: add dt-bindings, actual driver, DT node, and config symbol.
Changes:
v1 -> v2
* Fix yaml warnings from dt-binding
* Update IRQ names to reflect TSU expectations
v2 -> v3
* Remove useless 'renesas,tsu-operating-mode' property
v3 -> v4
* Improve some commit messages
* Fix interrupt description in YAML binding file
Regards,
John Madieu (5):
soc: renesas: rz-sysc: add syscon/regmap support
dt-bindings: thermal: r9a09g047-tsu: Document the TSU unit
thermal: renesas: rzg3e: Add thermal driver for the Renesas RZ/G3E SoC
arm64: dts: renesas: r9a09g047: Add TSU node
arm64: defconfig: Enable the Renesas RZ/G3E thermal driver
.../thermal/renesas,r9a09g047-tsu.yaml | 81 ++++
MAINTAINERS | 7 +
arch/arm64/boot/dts/renesas/r9a09g047.dtsi | 48 ++
arch/arm64/configs/defconfig | 1 +
drivers/soc/renesas/Kconfig | 1 +
drivers/soc/renesas/r9a09g047-sys.c | 1 +
drivers/soc/renesas/rz-sysc.c | 30 +-
drivers/soc/renesas/rz-sysc.h | 2 +
drivers/thermal/renesas/Kconfig | 7 +
drivers/thermal/renesas/Makefile | 1 +
drivers/thermal/renesas/rzg3e_thermal.c | 445 ++++++++++++++++++
11 files changed, 623 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml
create mode 100644 drivers/thermal/renesas/rzg3e_thermal.c
--
2.25.1
