All ISP instances on V3U have both a channel select and core function block, describe the core region in addition to the existing cs region. The interrupt number already described intended to reflect the cs function but did incorrectly describe the core block. This was not noticed until now as the driver do not make use of the interrupt for the cs block. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx> --- arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 60 +++++++++++++++++------ 1 file changed, 44 insertions(+), 16 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index f1613bfd1632..95ff69339991 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -2588,13 +2588,20 @@ du_out_dsi1: endpoint { isp0: isp@fed00000 { compatible = "renesas,r8a779a0-isp", "renesas,rcar-gen4-isp"; - reg = <0 0xfed00000 0 0x10000>; - interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 612>; + reg = <0 0xfed00000 0 0x10000>, <0 0xfec00000 0 0x100000>; + reg-names = "cs", "core"; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cs", "core"; + clocks = <&cpg CPG_MOD 612>, <&cpg CPG_MOD 16>; + clock-names = "cs", "core"; power-domains = <&sysc R8A779A0_PD_A3ISP01>; - resets = <&cpg 612>; + resets = <&cpg 612>, <&cpg 16>; + reset-names = "cs", "core"; status = "disabled"; + renesas,vspx = <&vspx0>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -2672,13 +2679,20 @@ isp0vin07: endpoint { isp1: isp@fed20000 { compatible = "renesas,r8a779a0-isp", "renesas,rcar-gen4-isp"; - reg = <0 0xfed20000 0 0x10000>; - interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 613>; + reg = <0 0xfed20000 0 0x10000>, <0 0xfee00000 0 0x100000>; + reg-names = "cs", "core"; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cs", "core"; + clocks = <&cpg CPG_MOD 613>, <&cpg CPG_MOD 17>; + clock-names = "cs", "core"; power-domains = <&sysc R8A779A0_PD_A3ISP01>; - resets = <&cpg 613>; + resets = <&cpg 613>, <&cpg 17>; + reset-names = "cs", "core"; status = "disabled"; + renesas,vspx = <&vspx1>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -2756,13 +2770,20 @@ isp1vin15: endpoint { isp2: isp@fed30000 { compatible = "renesas,r8a779a0-isp", "renesas,rcar-gen4-isp"; - reg = <0 0xfed30000 0 0x10000>; - interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 614>; + reg = <0 0xfed30000 0 0x10000>, <0 0xfef00000 0 0x100000>; + reg-names = "cs", "core"; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cs", "core"; + clocks = <&cpg CPG_MOD 614>, <&cpg CPG_MOD 18>; + clock-names = "cs", "core"; power-domains = <&sysc R8A779A0_PD_A3ISP23>; - resets = <&cpg 614>; + resets = <&cpg 614>, <&cpg 18>; + reset-names = "cs", "core"; status = "disabled"; + renesas,vspx = <&vspx2>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -2840,13 +2861,20 @@ isp2vin23: endpoint { isp3: isp@fed40000 { compatible = "renesas,r8a779a0-isp", "renesas,rcar-gen4-isp"; - reg = <0 0xfed40000 0 0x10000>; - interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 615>; + reg = <0 0xfed40000 0 0x10000>, <0 0xfe400000 0 0x100000>; + reg-names = "cs", "core"; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cs", "core"; + clocks = <&cpg CPG_MOD 615>, <&cpg CPG_MOD 19>; + clock-names = "cs", "core"; power-domains = <&sysc R8A779A0_PD_A3ISP23>; - resets = <&cpg 615>; + resets = <&cpg 615>, <&cpg 19>; + reset-names = "cs", "core"; status = "disabled"; + renesas,vspx = <&vspx3>; + ports { #address-cells = <1>; #size-cells = <0>; -- 2.48.1