From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> Increase the `maxItems` value for the `interrupts` and `interrupt-names` properties to 11 to support additional per-channel Tx/Rx completion interrupts on the Renesas RZ/V2H(P) SoC, which features the `snps,dwmac-5.20` IP. Refactor the `interrupt-names` property by replacing repeated `enum` entries with a `oneOf` list. Add support for per-channel receive and transmit completion interrupts using regex patterns. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> --- Note, for adding constraints to vendor bindings patch [0] has been sent out seprately. [0] https://lore.kernel.org/all/20250309003301.1152228-1-prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx/ v2->v3 - Dropped adding `additionalItems` - Moved interrupts description into interrupt-names - Replaced enum with a oneOf and added Rx/Tx regex patterns v1->v2 - No change --- .../devicetree/bindings/net/snps,dwmac.yaml | 24 ++++++++++++------- 1 file changed, 15 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 78b3030dc56d..bacec6e6514b 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -114,19 +114,25 @@ properties: interrupts: minItems: 1 - items: - - description: Combined signal for various interrupt events - - description: The interrupt to manage the remote wake-up packet detection - - description: The interrupt that occurs when Rx exits the LPI state - - description: The interrupt that occurs when HW safety error triggered + maxItems: 11 interrupt-names: minItems: 1 + maxItems: 26 items: - - const: macirq - - enum: [eth_wake_irq, eth_lpi, sfty] - - enum: [eth_wake_irq, eth_lpi, sfty] - - enum: [eth_wake_irq, eth_lpi, sfty] + oneOf: + - description: Combined signal for various interrupt events + const: macirq + - description: The interrupt to manage the remote wake-up packet detection + const: eth_wake_irq + - description: The interrupt that occurs when Rx exits the LPI state + const: eth_lpi + - description: The interrupt that occurs when HW safety error triggered + const: sfty + - description: Per channel receive completion interrupt + pattern: '^rx-queue-[0-3]$' + - description: Per channel transmit completion interrupt + pattern: '^tx-queue-[0-3]$' clocks: minItems: 1 -- 2.43.0
