From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
There are different switches available on both the RZ/G3S SMARC Module and
RZ SMARC Carrier II boards. These switches are used to route different SoC
signals to different parts available on board.
These switches are described in device trees through macros. These macros
are set accordingly such that the resulted compiled dtb to describe the
on-board switches states.
The SCIF1 depends on the state of the SW_CONFIG3 and SW_OPT_MUX4 switches.
SCIF1 can be enabled through a device tree overlay. To manage all switches
in a unified state and allow users to configure the output device tree, add
a file that contains all switch definitions and states.
Commit prepares the code to enable SCIF1 on the RZ/G3S overlay.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
---
Changes in v4:
- adjusted the patch description
- used GPL-2.0-only OR BSD-2-Clause license
- used proper description for SW_CONFIG3
Changes in v3:
- none
Changes in v2:
- none
.../boot/dts/renesas/rzg3s-smarc-som.dtsi | 20 +-----------
.../boot/dts/renesas/rzg3s-smarc-switches.h | 32 +++++++++++++++++++
2 files changed, 33 insertions(+), 19 deletions(-)
create mode 100644 arch/arm64/boot/dts/renesas/rzg3s-smarc-switches.h
diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
index ef12c1c462a7..39845faec894 100644
--- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
@@ -9,25 +9,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
-/*
- * On-board switches' states:
- * @SW_OFF: switch's state is OFF
- * @SW_ON: switch's state is ON
- */
-#define SW_OFF 0
-#define SW_ON 1
-
-/*
- * SW_CONFIG[x] switches' states:
- * @SW_CONFIG2:
- * SW_OFF - SD0 is connected to eMMC
- * SW_ON - SD0 is connected to uSD0 card
- * @SW_CONFIG3:
- * SW_OFF - SD2 is connected to SoC
- * SW_ON - SCIF1, SSI0, IRQ0, IRQ1 connected to SoC
- */
-#define SW_CONFIG2 SW_OFF
-#define SW_CONFIG3 SW_ON
+#include "rzg3s-smarc-switches.h"
/ {
compatible = "renesas,rzg3s-smarcm", "renesas,r9a08g045s33", "renesas,r9a08g045";
diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-switches.h b/arch/arm64/boot/dts/renesas/rzg3s-smarc-switches.h
new file mode 100644
index 000000000000..514a8a6dc013
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-switches.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * On-board switches for the Renesas RZ/G3S SMARC Module and RZ SMARC Carrier II
+ * boards.
+ *
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ */
+
+#ifndef __RZG3S_SMARC_SWITCHES__
+#define __RZG3S_SMARC_SWITCHES__
+
+/*
+ * On-board switches' states:
+ * @SW_OFF: switch's state is OFF
+ * @SW_ON: switch's state is ON
+ */
+#define SW_OFF 0
+#define SW_ON 1
+
+/*
+ * SW_CONFIG[x] switches' states:
+ * @SW_CONFIG2:
+ * SW_OFF - SD0 is connected to eMMC
+ * SW_ON - SD0 is connected to uSD0 card
+ * @SW_CONFIG3:
+ * SW_OFF - SD2 is connected to SoC
+ * SW_ON - SCIF1, SSI0, IRQ0, IRQ1 connected to SoC
+ */
+#define SW_CONFIG2 SW_OFF
+#define SW_CONFIG3 SW_ON
+
+#endif /* __RZG3S_SMARC_SWITCHES__ */
--
2.43.0
