[PATCH 2/5] arm64: dts: renesas: spider-ethernet: Access rswitch ports via phandles

[Marek Vasut <marek.vasut+renesas@xxxxxxxxxxx>]

The r8a779f0.dtsi now contains labels for each rswitch port in
the form 'rswitchportN'. Use those to access rswitch ports and
slightly reduce the depth of this board DT. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxxxx>
---
Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Cc: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-renesas-soc@xxxxxxxxxxxxxxx
---
 .../dts/renesas/r8a779f0-spider-ethernet.dtsi | 87 +++++++++----------
 1 file changed, 42 insertions(+), 45 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi
index 5d38669ed1ec3..069f36ba53a4f 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi
@@ -42,61 +42,58 @@ &rswitch {
 	pinctrl-0 = <&tsn0_pins>, <&tsn1_pins>, <&tsn2_pins>;
 	pinctrl-names = "default";
 	status = "okay";
+};
+
+&rswitchport0 {
+	reg = <0>;
+	phy-handle = <&u101>;
+	phy-mode = "sgmii";
+	phys = <&eth_serdes 0>;
 
-	ethernet-ports {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		port@0 {
-			reg = <0>;
-			phy-handle = <&u101>;
-			phy-mode = "sgmii";
-			phys = <&eth_serdes 0>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				u101: ethernet-phy@1 {
-					reg = <1>;
-					compatible = "ethernet-phy-ieee802.3-c45";
-					interrupts-extended = <&gpio3 10 IRQ_TYPE_LEVEL_LOW>;
-				};
-			};
-		};
-		port@1 {
+		u101: ethernet-phy@1 {
 			reg = <1>;
-			phy-handle = <&u201>;
-			phy-mode = "sgmii";
-			phys = <&eth_serdes 1>;
+			compatible = "ethernet-phy-ieee802.3-c45";
+			interrupts-extended = <&gpio3 10 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
 
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
+&rswitchport1 {
+	reg = <1>;
+	phy-handle = <&u201>;
+	phy-mode = "sgmii";
+	phys = <&eth_serdes 1>;
 
-				u201: ethernet-phy@2 {
-					reg = <2>;
-					compatible = "ethernet-phy-ieee802.3-c45";
-					interrupts-extended = <&gpio3 11 IRQ_TYPE_LEVEL_LOW>;
-				};
-			};
-		};
-		port@2 {
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		u201: ethernet-phy@2 {
 			reg = <2>;
-			phy-handle = <&u301>;
-			phy-mode = "sgmii";
-			phys = <&eth_serdes 2>;
+			compatible = "ethernet-phy-ieee802.3-c45";
+			interrupts-extended = <&gpio3 11 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&rswitchport2 {
+	reg = <2>;
+	phy-handle = <&u301>;
+	phy-mode = "sgmii";
+	phys = <&eth_serdes 2>;
 
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-				u301: ethernet-phy@3 {
-					reg = <3>;
-					compatible = "ethernet-phy-ieee802.3-c45";
-					interrupts-extended = <&gpio3 9 IRQ_TYPE_LEVEL_LOW>;
-				};
-			};
+		u301: ethernet-phy@3 {
+			reg = <3>;
+			compatible = "ethernet-phy-ieee802.3-c45";
+			interrupts-extended = <&gpio3 9 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };
-- 
2.45.2