Hello, This small series aims to remove the code duplication that was added when adding support for Gen4 devices. The logic to read the calibration fuses are identical for Gen3 and Gen4, but the registers are at different offsets. Patch 1/2 is a small drive-by patch which fixes a style issue of the constants found when working on the fuses code. While patch 2/2 is the real work removing the code duplication. It is tested on both Gen3 and Gen4 boards, but as not all boards have the fused calibration values and the driver fallback to hardcoded values only Gen4 have really been tested as I don't have access to a Gen3 board with fused calibration values. See individual patches for changelog. Niklas Söderlund (2): thermal: rcar_gen3: Use lowercase hex constants thermal: rcar_gen3: Reuse logic to read fuses on Gen3 and Gen4 drivers/thermal/renesas/rcar_gen3_thermal.c | 95 +++++++++------------ 1 file changed, 39 insertions(+), 56 deletions(-) -- 2.47.0
