[PATCH v2 2/3] pinctrl: renesas: rzg2l: Add support for enabling/disabling open-drain outputs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

Add support for enabling and disabling open-drain outputs.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
v1->v2
- Implemented PIN_CONFIG_DRIVE_OPEN_DRAIN to disable open drain
---
 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index b2d309f742af..8d576cc74003 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -139,6 +139,7 @@
 #define IEN(off)		(0x1800 + (off) * 8)
 #define PUPD(off)		(0x1C00 + (off) * 8)
 #define ISEL(off)		(0x2C00 + (off) * 8)
+#define NOD(off)		(0x3000 + (off) * 8)
 #define SD_CH(off, ch)		((off) + (ch) * 4)
 #define ETH_POC(off, ch)	((off) + (ch) * 4)
 #define QSPI			(0x3008)
@@ -160,6 +161,7 @@
 #define IOLH_MASK		0x03
 #define SR_MASK			0x01
 #define PUPD_MASK		0x03
+#define NOD_MASK		0x01
 
 #define PM_INPUT		0x1
 #define PM_OUTPUT		0x2
@@ -1337,6 +1339,18 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
 		break;
 	}
 
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		if (!(cfg & PIN_CFG_NOD))
+			return -EINVAL;
+
+		arg = rzg2l_read_pin_config(pctrl, NOD(off), bit, NOD_MASK);
+		if (!arg && param != PIN_CONFIG_DRIVE_PUSH_PULL)
+			return -EINVAL;
+		if (arg && param != PIN_CONFIG_DRIVE_OPEN_DRAIN)
+			return -EINVAL;
+		break;
+
 	case RENESAS_RZV2H_PIN_CONFIG_OUTPUT_IMPEDANCE:
 		if (!(cfg & PIN_CFG_IOLH_RZV2H))
 			return -EINVAL;
@@ -1466,6 +1480,15 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 			rzg2l_rmw_pin_config(pctrl, IOLH(off), bit, IOLH_MASK, index);
 			break;
 
+		case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		case PIN_CONFIG_DRIVE_PUSH_PULL:
+			if (!(cfg & PIN_CFG_NOD))
+				return -EINVAL;
+
+			rzg2l_rmw_pin_config(pctrl, NOD(off), bit, NOD_MASK,
+					     param == PIN_CONFIG_DRIVE_OPEN_DRAIN ? 1 : 0);
+			break;
+
 		case RENESAS_RZV2H_PIN_CONFIG_OUTPUT_IMPEDANCE:
 			if (!(cfg & PIN_CFG_IOLH_RZV2H))
 				return -EINVAL;
-- 
2.43.0





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux