[PATCH 2/3] arm64: dts: renesas: hihope: Add SD/OE pin properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add SD/OE pin properties to the devicetree so that Linux can configure
the pin without relying on the OTP. This is based on Geert's analysis of
the schematic [1].

[1] https://lore.kernel.org/linux-arm-kernel/CAMuHMdUmf=BYrVWGDp4kjLGK=66HSMJbHuMvne-xGLkTYnGv2g@xxxxxxxxxxxxxx/

Signed-off-by: Sean Anderson <sean.anderson@xxxxxxxxx>
---

 arch/arm64/boot/dts/renesas/hihope-common.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index 83104af2813e..6abe094fc253 100644
--- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -198,6 +198,8 @@ versaclock5: clock-generator@6a {
 		#clock-cells = <1>;
 		clocks = <&x304_clk>;
 		clock-names = "xin";
+		idt,shutdown = <0>;
+		idt,output-enable-active = <1>;
 	};
 };
 
-- 
2.35.1.1320.gc452695387.dirty





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux