Hi Claudiu,
On Thu, Aug 22, 2024 at 5:28 PM Claudiu <claudiu.beznea@xxxxxxxxx> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>
> The RZ/G3S SYS Controller has 2 registers (one for PCIE one for USB) that
> need to be configured before/after powering off/on the PCI or USB
> ares. The bits in these registers control signals to PCIE and USB that
> need to be de-asserted/asserted after/before power on/off event. For this
> add SYSC controller driver that registers a reset controller driver on
> auxiliary bus which allows USB, PCIE drivers to control these signals.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
Thanks for your patch!
> --- /dev/null
> +++ b/drivers/reset/reset-rzg3s-sysc.c
> @@ -0,0 +1,140 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Renesas RZ/G3S SYSC reset driver
> + *
> + * Copyright (C) 2024 Renesas Electronics Corp.
> + */
> +
> +#include <linux/auxiliary_bus.h>
Using the Auxiliary Bus requires selecting AUXILIARY_BUS.
Elsse you might run into build failures:
aarch64-linux-gnu-ld: drivers/soc/renesas/rzg3s-sysc.o: in function
`rzg3s_sysc_probe':
rzg3s-sysc.c:(.text+0x21c): undefined reference to `auxiliary_device_init'
aarch64-linux-gnu-ld: rzg3s-sysc.c:(.text+0x264): undefined reference
to `__auxiliary_device_add'
aarch64-linux-gnu-ld: drivers/reset/reset-rzg3s-sysc.o: in function
`rzg3s_sysc_reset_driver_init':
reset-rzg3s-sysc.c:(.init.text+0x1c): undefined reference to
`__auxiliary_driver_register'
aarch64-linux-gnu-ld: drivers/reset/reset-rzg3s-sysc.o: in function
`rzg3s_sysc_reset_driver_exit':
reset-rzg3s-sysc.c:(.exit.text+0x10): undefined reference to
`auxiliary_driver_unregister'
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
