Re: [PATCH v7 0/4] PCI: qcom: Add 16.0 GT/s equalization and margining settings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 11, 2024 at 08:56:25PM +0530, Manivannan Sadhasivam via B4 Relay wrote:
> This series adds 16.0 GT/s specific equalization and RX lane margining settings
> to the Qcom RC and EP drivers. This series is mandatory for the stable operation
> of the PCIe link at 16.0 GT/s on the Qcom platforms.

> Manivannan Sadhasivam (2):
>       PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
>       PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
> 
> Shashank Babu Chinta Venkata (2):
>       PCI: qcom: Add equalization settings for 16.0 GT/s
>       PCI: qcom: Add RX lane margining settings for 16.0 GT/s

Thanks for respinning, Mani.

Bjorn, it would be great to have these in 6.12 since we're currently
seeing lots of NVMe link errors on x1e80100 platforms (e.g. the Lenovo
ThinkPad T14s) without them.

These errors are also blocking the enabling of using the GIC ITS for
interrupts since that will cause all these AER reports to spam the
logs. So if you pick this one up, please consider also picking up:

	https://lore.kernel.org/lkml/20240711090250.20827-1-johan+linaro@xxxxxxxxxx/

[ Note that the later added PCIe5 RC does not currently support ITS. ]

Also note that users of these machines have been running with ITS
support enabled for months now when using my x1e80100 wip branches, such
as:

	https://github.com/jhovold/linux/tree/wip/x1e80100-6.11-rc7

So this is all quite well-tested by now.

Johan




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux