Re: [PATCH 3/3] media: platform: rzg2l-cru: Add support to capture 8bit raw sRGB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Prabhakar,

Thank you for the patch.

On Fri, Sep 06, 2024 at 06:39:47PM +0100, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> 
> Add support to capture 8bit Bayer formats.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
>  .../platform/renesas/rzg2l-cru/rzg2l-cru.h    |  5 ++
>  .../platform/renesas/rzg2l-cru/rzg2l-csi2.c   |  7 ++-
>  .../platform/renesas/rzg2l-cru/rzg2l-ip.c     |  9 +++-
>  .../platform/renesas/rzg2l-cru/rzg2l-video.c  | 51 ++++++++++++++++---
>  4 files changed, 61 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h
> index 174760239548..83c664cb0929 100644
> --- a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h
> +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h
> @@ -58,6 +58,11 @@ struct rzg2l_cru_ip {
>  	struct v4l2_subdev *remote;
>  };
>  
> +enum rzg2l_cru_fmt {
> +	RZG2L_YUV = 0,
> +	RZG2L_RAW_BAYER,
> +	RZG2L_USER_DEFINED,
> +};
>  /**
>   * struct rzg2l_cru_dev - Renesas CRU device structure
>   * @dev:		(OF) device
> diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c
> index a7e4a0c109da..b14c92cd7c18 100644
> --- a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c
> +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c
> @@ -18,6 +18,7 @@
>  #include <linux/sys_soc.h>
>  #include <linux/units.h>
>  
> +#include <media/mipi-csi2.h>
>  #include <media/v4l2-ctrls.h>
>  #include <media/v4l2-device.h>
>  #include <media/v4l2-fwnode.h>
> @@ -188,7 +189,11 @@ struct rzg2l_csi2_format {
>  };
>  
>  static const struct rzg2l_csi2_format rzg2l_csi2_formats[] = {
> -	{ .code = MEDIA_BUS_FMT_UYVY8_1X16,	.datatype = 0x1e, .bpp = 16 },
> +	{ .code = MEDIA_BUS_FMT_UYVY8_1X16, .datatype = MIPI_CSI2_DT_YUV422_8B, .bpp = 16 },
> +	{ .code = MEDIA_BUS_FMT_SBGGR8_1X8, .datatype = MIPI_CSI2_DT_RAW8, .bpp = 8, },
> +	{ .code = MEDIA_BUS_FMT_SGBRG8_1X8, .datatype = MIPI_CSI2_DT_RAW8, .bpp = 8, },
> +	{ .code = MEDIA_BUS_FMT_SGRBG8_1X8, .datatype = MIPI_CSI2_DT_RAW8, .bpp = 8, },
> +	{ .code = MEDIA_BUS_FMT_SRGGB8_1X8, .datatype = MIPI_CSI2_DT_RAW8, .bpp = 8, },
>  };
>  
>  static inline struct rzg2l_csi2 *sd_to_csi2(struct v4l2_subdev *sd)
> diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-ip.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-ip.c
> index ac8ebae4ed07..5f60be92ea85 100644
> --- a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-ip.c
> +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-ip.c
> @@ -6,6 +6,7 @@
>   */
>  
>  #include <linux/delay.h>
> +#include <media/mipi-csi2.h>

I would add a blank line on both sides.

>  #include "rzg2l-cru.h"
>  
>  struct rzg2l_cru_ip_format {
> @@ -15,7 +16,11 @@ struct rzg2l_cru_ip_format {
>  };
>  
>  static const struct rzg2l_cru_ip_format rzg2l_cru_ip_formats[] = {
> -	{ .code = MEDIA_BUS_FMT_UYVY8_1X16,	.datatype = 0x1e, .bpp = 16 },
> +	{ .code = MEDIA_BUS_FMT_UYVY8_1X16, .datatype = MIPI_CSI2_DT_YUV422_8B, .bpp = 16 },
> +	{ .code = MEDIA_BUS_FMT_SBGGR8_1X8, .datatype = MIPI_CSI2_DT_RAW8, .bpp = 8, },
> +	{ .code = MEDIA_BUS_FMT_SGBRG8_1X8, .datatype = MIPI_CSI2_DT_RAW8, .bpp = 8, },
> +	{ .code = MEDIA_BUS_FMT_SGRBG8_1X8, .datatype = MIPI_CSI2_DT_RAW8, .bpp = 8, },
> +	{ .code = MEDIA_BUS_FMT_SRGGB8_1X8, .datatype = MIPI_CSI2_DT_RAW8, .bpp = 8, },
>  };
>  
>  enum rzg2l_csi2_pads {
> @@ -149,7 +154,7 @@ static int rzg2l_cru_ip_enum_frame_size(struct v4l2_subdev *sd,
>  	if (fse->index != 0)
>  		return -EINVAL;
>  
> -	if (fse->code != MEDIA_BUS_FMT_UYVY8_1X16)
> +	if (!rzg2l_cru_ip_code_to_fmt(fse->code))
>  		return -EINVAL;
>  
>  	fse->min_width = RZG2L_CRU_MIN_INPUT_WIDTH;
> diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-video.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-video.c
> index 6101a070e785..66a0b80e8da7 100644
> --- a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-video.c
> +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-video.c
> @@ -15,6 +15,7 @@
>  #include <linux/delay.h>
>  #include <linux/pm_runtime.h>
>  
> +#include <media/mipi-csi2.h>
>  #include <media/v4l2-ioctl.h>
>  #include <media/videobuf2-dma-contig.h>
>  
> @@ -78,6 +79,7 @@
>  #define ICnMC				0x208
>  #define ICnMC_CSCTHR			BIT(5)
>  #define ICnMC_INF_YUV8_422		(0x1e << 16)
> +#define ICnMC_INF_RAW8			(0x2a << 16)
>  #define ICnMC_INF_USER			(0x30 << 16)

It looks like the INF field contains the MIPI data type. I would replace
this with

#define ICnMC_INF(x)			((x) << 16)

and use it as

	ICnMC_INF(MIPI_CSI2_DT_RAW8)

>  #define ICnMC_VCSEL(x)			((x) << 22)
>  #define ICnMC_INF_MASK			GENMASK(21, 16)
> @@ -203,6 +205,10 @@ static int rzg2l_cru_mc_validate_format(struct rzg2l_cru_dev *cru,
>  
>  	switch (fmt.format.code) {
>  	case MEDIA_BUS_FMT_UYVY8_1X16:
> +	case MEDIA_BUS_FMT_SBGGR8_1X8:
> +	case MEDIA_BUS_FMT_SGBRG8_1X8:
> +	case MEDIA_BUS_FMT_SGRBG8_1X8:
> +	case MEDIA_BUS_FMT_SRGGB8_1X8:
>  		break;
>  	default:
>  		return -EPIPE;
> @@ -300,7 +306,7 @@ static void rzg2l_cru_initialize_axi(struct rzg2l_cru_dev *cru)
>  	rzg2l_cru_write(cru, AMnAXIATTR, amnaxiattr);
>  }
>  
> -static void rzg2l_cru_csi2_setup(struct rzg2l_cru_dev *cru, bool *input_is_yuv,
> +static void rzg2l_cru_csi2_setup(struct rzg2l_cru_dev *cru, enum rzg2l_cru_fmt *input_fmt,
>  				 struct v4l2_mbus_framefmt *ip_sd_fmt)
>  {
>  	u32 icnmc;
> @@ -308,11 +314,18 @@ static void rzg2l_cru_csi2_setup(struct rzg2l_cru_dev *cru, bool *input_is_yuv,
>  	switch (ip_sd_fmt->code) {
>  	case MEDIA_BUS_FMT_UYVY8_1X16:
>  		icnmc = ICnMC_INF_YUV8_422;
> -		*input_is_yuv = true;
> +		*input_fmt = RZG2L_YUV;
> +		break;
> +	case MEDIA_BUS_FMT_SBGGR8_1X8:
> +	case MEDIA_BUS_FMT_SGBRG8_1X8:
> +	case MEDIA_BUS_FMT_SGRBG8_1X8:
> +	case MEDIA_BUS_FMT_SRGGB8_1X8:
> +		icnmc = ICnMC_INF_RAW8;
> +		*input_fmt = RZG2L_RAW_BAYER;
>  		break;
>  	default:
> -		*input_is_yuv = false;
>  		icnmc = ICnMC_INF_USER;
> +		*input_fmt = RZG2L_USER_DEFINED;
>  		break;
>  	}
>  
> @@ -327,17 +340,23 @@ static void rzg2l_cru_csi2_setup(struct rzg2l_cru_dev *cru, bool *input_is_yuv,
>  static int rzg2l_cru_initialize_image_conv(struct rzg2l_cru_dev *cru,
>  					   struct v4l2_mbus_framefmt *ip_sd_fmt)
>  {
> -	bool output_is_yuv = false;
> -	bool input_is_yuv = false;
> +	enum rzg2l_cru_fmt input_fmt, output_fmt;
>  	u32 icndmr;
>  
> -	rzg2l_cru_csi2_setup(cru, &input_is_yuv, ip_sd_fmt);
> +	rzg2l_cru_csi2_setup(cru, &input_fmt, ip_sd_fmt);
>  
>  	/* Output format */
>  	switch (cru->format.pixelformat) {
>  	case V4L2_PIX_FMT_UYVY:
>  		icndmr = ICnDMR_YCMODE_UYVY;
> -		output_is_yuv = true;
> +		output_fmt = RZG2L_YUV;
> +		break;
> +	case V4L2_PIX_FMT_SBGGR8:
> +	case V4L2_PIX_FMT_SGBRG8:
> +	case V4L2_PIX_FMT_SGRBG8:
> +	case V4L2_PIX_FMT_SRGGB8:
> +		icndmr = 0;
> +		output_fmt = RZG2L_RAW_BAYER;
>  		break;
>  	default:
>  		dev_err(cru->dev, "Invalid pixelformat (0x%x)\n",
> @@ -346,7 +365,7 @@ static int rzg2l_cru_initialize_image_conv(struct rzg2l_cru_dev *cru,
>  	}
>  
>  	/* If input and output use same colorspace, do bypass mode */
> -	if (output_is_yuv == input_is_yuv)
> +	if (input_fmt == output_fmt)
>  		rzg2l_cru_write(cru, ICnMC,
>  				rzg2l_cru_read(cru, ICnMC) | ICnMC_CSCTHR);
>  	else
> @@ -809,6 +828,22 @@ static const struct v4l2_format_info rzg2l_cru_formats[] = {
>  		.format = V4L2_PIX_FMT_UYVY,
>  		.bpp[0] = 2,
>  	},
> +	{
> +		.format = V4L2_PIX_FMT_SBGGR8,
> +		.bpp[0] = 1,
> +	},
> +	{
> +		.format = V4L2_PIX_FMT_SGBRG8,
> +		.bpp[0] = 1,
> +	},
> +	{
> +		.format = V4L2_PIX_FMT_SGRBG8,
> +		.bpp[0] = 1,
> +	},
> +	{
> +		.format = V4L2_PIX_FMT_SRGGB8,
> +		.bpp[0] = 1,
> +	},
>  };

I think all of this could be simplified if you add the format to the
rzg2l_cru_ip_format structure, as well as a rzg2l_cru_fmt member, and
used rzg2l_cru_ip_format through the driver.
rzg2l_cru_initialize_image_conv() would look up the rzg2l_cru_ip_format
entry based on the code, and would pass that to rzg2l_cru_csi2_setup(),
which wouldn't have to return an input_fmt. You could even add the
icndmr value to the structure too, to avoid a switch/case.

>  
>  const struct v4l2_format_info *rzg2l_cru_format_from_pixel(u32 format)

-- 
Regards,

Laurent Pinchart




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux