Re: [PATCH v6 3/3] hwmon: (isl28022) support shunt voltage for ISL28022 power monitor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06/09/2024 08:14, Delphine CC Chiu wrote:
> Added support reading shunt voltage in mV and revise code
> for Renesas ISL28022.
> 
> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
> ---
>  drivers/hwmon/isl28022.c | 93 ++++++++++++++++++++++++++++------------
>  1 file changed, 66 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/hwmon/isl28022.c b/drivers/hwmon/isl28022.c
> index f0494c3bd483..01220fad813d 100644
> --- a/drivers/hwmon/isl28022.c
> +++ b/drivers/hwmon/isl28022.c
> @@ -85,8 +85,6 @@ struct isl28022_data {
>  	u32			shunt;
>  	u32			gain;
>  	u32			average;
> -	u16			config;
> -	u16			calib;
>  };
>  
>  static int isl28022_read(struct device *dev, enum hwmon_sensor_types type,
> @@ -95,20 +93,61 @@ static int isl28022_read(struct device *dev, enum hwmon_sensor_types type,
>  	struct isl28022_data *data = dev_get_drvdata(dev);
>  	unsigned int regval;
>  	int err;
> +	u16 sign_bit;
>  
>  	switch (type) {
>  	case hwmon_in:
> -		switch (attr) {
> -		case hwmon_in_input:
> -			err = regmap_read(data->regmap,
> -					  ISL28022_REG_BUS, &regval);
> -			if (err < 0)
> -				return err;
> -			/* driver supports only 60V mode (BRNG 11) */
> -			*val = (long)(((u16)regval) & 0xFFFC);
> +		switch (channel) {
> +		case 0:
> +			switch (attr) {
> +			case hwmon_in_input:
> +				err = regmap_read(data->regmap,
> +						  ISL28022_REG_BUS, &regval);
> +				if (err < 0)
> +					return err;
> +				/* driver supports only 60V mode (BRNG 11) */
> +				*val = (long)(((u16)regval) & 0xFFFC);
> +				break;
> +			default:
> +				return -EOPNOTSUPP;
> +			}
> +			break;
> +		case 1:
> +			switch (attr) {
> +			case hwmon_in_input:
> +				err = regmap_read(data->regmap,
> +						  ISL28022_REG_SHUNT, &regval);
> +				if (err < 0)
> +					return err;
> +			switch (data->gain) {
> +			case 8:
> +				sign_bit = (regval >> 15) & 0x01;
> +				*val = (long)((((u16)regval) & 0x7FFF) -
> +					   (sign_bit * 32768)) / 100;
> +				break;
> +			case 4:
> +				sign_bit = (regval >> 14) & 0x01;
> +				*val = (long)((((u16)regval) & 0x3FFF) -
> +					   (sign_bit * 16384)) / 100;
> +				break;
> +			case 2:
> +				sign_bit = (regval >> 13) & 0x01;
> +				*val = (long)((((u16)regval) & 0x1FFF) -
> +					   (sign_bit * 8192)) / 100;
> +				break;
> +			case 1:
> +				sign_bit = (regval >> 12) & 0x01;
> +				*val = (long)((((u16)regval) & 0x0FFF) -
> +					   (sign_bit * 4096)) / 100;
> +				break;
> +			}
> +			break;
> +			default:
> +				return -EOPNOTSUPP;
> +			}
>  			break;
>  		default:
> -			return -EINVAL;
> +			return -EOPNOTSUPP;
>  		}
>  		break;
>  	case hwmon_curr:
> @@ -122,7 +161,7 @@ static int isl28022_read(struct device *dev, enum hwmon_sensor_types type,
>  				(long)data->shunt;
>  			break;
>  		default:
> -			return -EINVAL;
> +			return -EOPNOTSUPP;
>  		}
>  		break;
>  	case hwmon_power:
> @@ -136,11 +175,11 @@ static int isl28022_read(struct device *dev, enum hwmon_sensor_types type,
>  				(long)data->shunt) * (long)regval;
>  			break;
>  		default:
> -			return -EINVAL;
> +			return -EOPNOTSUPP;
>  		}
>  		break;
>  	default:
> -		return -EINVAL;
> +		return -EOPNOTSUPP;
>  	}
>  
>  	return 0;
> @@ -182,7 +221,8 @@ static umode_t isl28022_is_visible(const void *data, enum hwmon_sensor_types typ
>  
>  static const struct hwmon_channel_info *isl28022_info[] = {
>  	HWMON_CHANNEL_INFO(in,
> -			   HWMON_I_INPUT),	/* channel 0: bus voltage (mV) */
> +			   HWMON_I_INPUT,	/* channel 0: bus voltage (mV) */
> +			   HWMON_I_INPUT),	/* channel 1: shunt voltage (mV) */
>  	HWMON_CHANNEL_INFO(curr,
>  			   HWMON_C_INPUT),	/* channel 1: current (mA) */
>  	HWMON_CHANNEL_INFO(power,
> @@ -368,24 +408,22 @@ static int isl28022_read_properties(struct device *dev, struct isl28022_data *da
>  static int isl28022_config(struct isl28022_data *data)
>  {
>  	int err;
> +	u16 config;
> +	u16 calib;
>  
> -	data->config = (ISL28022_MODE_CONT_SB << ISL28022_MODE_SHIFT) |
> +	config = (ISL28022_MODE_CONT_SB << ISL28022_MODE_SHIFT) |
>  			(ISL28022_BRNG_60 << ISL28022_BRNG_SHIFT) |
>  			(__ffs(data->gain) << ISL28022_PG_SHIFT) |
>  			((ISL28022_ADC_15_1 + __ffs(data->average)) << ISL28022_SADC_SHIFT) |
>  			((ISL28022_ADC_15_1 + __ffs(data->average)) << ISL28022_BADC_SHIFT);
>  
> -	data->calib = data->shunt ? 0x8000 / data->gain : 0;
> -
> -	err = regmap_write(data->regmap, ISL28022_REG_CONFIG, data->config);
> -	if (err < 0)
> -		return err;
> +	calib = data->shunt ? 0x8000 / data->gain : 0;
>  
> -	err = regmap_write(data->regmap, ISL28022_REG_CALIB, data->calib);
> +	err = regmap_write(data->regmap, ISL28022_REG_CONFIG, config);
>  	if (err < 0)
>  		return err;
>  
> -	return 0;
> +	return regmap_write(data->regmap, ISL28022_REG_CALIB, calib);
>  }
>  
>  static int isl28022_probe(struct i2c_client *client)
> @@ -396,8 +434,8 @@ static int isl28022_probe(struct i2c_client *client)
>  	int err;
>  
>  	if (!i2c_check_functionality(client->adapter,
> -				     I2C_FUNC_SMBUS_BYTE_DATA |
> -				     I2C_FUNC_SMBUS_WORD_DATA))
> +					 I2C_FUNC_SMBUS_BYTE_DATA |
> +					 I2C_FUNC_SMBUS_WORD_DATA))
>  		return -ENODEV;
>  
>  	data = devm_kzalloc(dev, sizeof(struct isl28022_data), GFP_KERNEL);
> @@ -418,7 +456,7 @@ static int isl28022_probe(struct i2c_client *client)
>  
>  	isl28022_debugfs_init(client, data);
>  
> -	hwmon_dev = devm_hwmon_device_register_with_info(dev, "isl28022_hwmon",
> +	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
>  							 data, &isl28022_chip_info, NULL);
>  	if (IS_ERR(hwmon_dev))
>  		return PTR_ERR(hwmon_dev);
> @@ -437,8 +475,9 @@ static struct i2c_driver isl28022_driver = {
>  	.class		= I2C_CLASS_HWMON,
>  	.driver = {
>  		.name	= "isl28022",
> +		.of_match_table = of_match_ptr(isl28022_of_match),

This is both unrelated and wrong. Your of_match_ptr causes here warnings.

Organize your patchset in logical chunks and be sure EACH has no
warnings. Your patch #1 now has such warnings. Please run standard
kernel tools for static analysis, like coccinelle, smatch and sparse,
and fix reported warnings. Also please check for warnings when building
with W=1. Most of these commands (checks or W=1 build) can build
specific targets, like some directory, to narrow the scope to only your
code. The code here looks like it needs a fix. Feel free to get in touch
if the warning is not clear.

Best regards,
Krzysztof





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux