[net-next] net: phy: Check for read errors in SIOCGMIIREG

[Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>]

When reading registers from the PHY using the SIOCGMIIREG IOCTL any
errors returned from either mdiobus_read() or mdiobus_c45_read() are
ignored, and parts of the returned error is passed as the register value
back to user-space.

For example, if mdiobus_c45_read() is used with a bus that do not
implement the read_c45() callback -EOPNOTSUPP is returned. This is
however directly stored in mii_data->val_out and returned as the
registers content. As val_out is a u16 the error code is truncated and
returned as a plausible register value.

Fix this by first checking the return value for errors before returning
it as the register content.

Before this patch,

    # phytool read eth0/0:1/0
    0xffa1

After this change,

    $ phytool read eth0/0:1/0
    error: phy_read (-95)

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
---
 drivers/net/phy/phy.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index cba3af926429..4f3e742907cb 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -342,14 +342,19 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
 		if (mdio_phy_id_is_c45(mii_data->phy_id)) {
 			prtad = mdio_phy_id_prtad(mii_data->phy_id);
 			devad = mdio_phy_id_devad(mii_data->phy_id);
-			mii_data->val_out = mdiobus_c45_read(
-				phydev->mdio.bus, prtad, devad,
-				mii_data->reg_num);
+			ret = mdiobus_c45_read(phydev->mdio.bus, prtad, devad,
+					       mii_data->reg_num);
+
 		} else {
-			mii_data->val_out = mdiobus_read(
-				phydev->mdio.bus, mii_data->phy_id,
-				mii_data->reg_num);
+			ret = mdiobus_read(phydev->mdio.bus, mii_data->phy_id,
+					   mii_data->reg_num);
 		}
+
+		if (ret < 0)
+			return ret;
+
+		mii_data->val_out = ret;
+
 		return 0;
 
 	case SIOCSMIIREG:
-- 
2.46.0