On Fri, 30 Aug 2024 21:30:03 +0100, Biju Das wrote:
> The RZ/{G2L,G2LC,V2L} SMARC EVK uses Micron MT25QU412A flash and RZ/G2UL
> SMARC EVK uses Renesas AT25QL128A flash. With current pin setting for
> IOVF pin, 4-bit flash write fails for AT25QL128A flash. Use Hi-Z state
> as the default for IOVF pin, so that spi controller driver in linux will
> be independent of flash type.
>
> To support this, during board production, the bit 4 of the NV config
> register must be cleared by the bootloader for Micron flash.
>
> [...]
Applied, thanks!
[1/3] memory: renesas-rpc-if: Use Hi-Z state as the default setting for IOVF pins
https://git.kernel.org/krzk/linux-mem-ctrl/c/84d1078af52f6a099267fccfb1dda602ac8b66d0
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
