Re: [PATCH v4 2/4] drm: renesas: rz-du: Add RZ/G2UL DU Support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Biju,

Thank you for the patch.

On Thu, Aug 22, 2024 at 05:23:15PM +0100, Biju Das wrote:
> The LCD controller is composed of Frame Compression Processor (FCPVD),
> Video Signal Processor (VSPD), and Display Unit (DU).
> 
> It has DPI interface and supports a maximum resolution of WXGA along
> with 2 RPFs to support the blending of two picture layers and raster
> operations (ROPs).
> 
> The DU module is connected to VSPD. Add RZ/G2UL DU support.
> 
> Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>

> ---
> v3->v4:
>  * Used "&" instead of "==" in rzg2l_du_start_stop() for scalability.
>  * Restored port variable in struct rzg2l_du_output_routing
>  * Updated rzg2l_du_encoders_init() to handle port based on hardware indices.
> v2->v3:
>  * Avoided the line break in rzg2l_du_start_stop() for rstate.
>  * Replaced port->du_output in  struct rzg2l_du_output_routing and
>    dropped using the port number to indicate the output type in
>    rzg2l_du_encoders_init().
>  * Updated rzg2l_du_r9a07g043u_info and rzg2l_du_r9a07g044_info
> v1->v2:
>  * No change.
> ---
>  drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c |  8 +++++++-
>  drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c  | 11 +++++++++++
>  drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c  |  3 ++-
>  3 files changed, 20 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> index 6e7aac6219be..c4c1474d487e 100644
> --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> @@ -28,6 +28,7 @@
>  #include "rzg2l_du_vsp.h"
>  
>  #define DU_MCR0			0x00
> +#define DU_MCR0_DPI_OE		BIT(0)
>  #define DU_MCR0_DI_EN		BIT(8)
>  
>  #define DU_DITR0		0x10
> @@ -216,9 +217,14 @@ static void rzg2l_du_crtc_put(struct rzg2l_du_crtc *rcrtc)
>  
>  static void rzg2l_du_start_stop(struct rzg2l_du_crtc *rcrtc, bool start)
>  {
> +	struct rzg2l_du_crtc_state *rstate = to_rzg2l_crtc_state(rcrtc->crtc.state);
>  	struct rzg2l_du_device *rcdu = rcrtc->dev;
> +	u32 val = DU_MCR0_DI_EN;
>  
> -	writel(start ? DU_MCR0_DI_EN : 0, rcdu->mmio + DU_MCR0);
> +	if (rstate->outputs & BIT(RZG2L_DU_OUTPUT_DPAD0))
> +		val |= DU_MCR0_DPI_OE;
> +
> +	writel(start ? val : 0, rcdu->mmio + DU_MCR0);
>  }
>  
>  static void rzg2l_du_crtc_start(struct rzg2l_du_crtc *rcrtc)
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> index e5eca8691a33..bc7c381f92ac 100644
> --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> @@ -25,6 +25,16 @@
>   * Device Information
>   */
>  
> +static const struct rzg2l_du_device_info rzg2l_du_r9a07g043u_info = {
> +	.channels_mask = BIT(0),
> +	.routes = {
> +		[RZG2L_DU_OUTPUT_DPAD0] = {
> +			.possible_outputs = BIT(0),
> +			.port = 0,
> +		},
> +	},
> +};
> +
>  static const struct rzg2l_du_device_info rzg2l_du_r9a07g044_info = {
>  	.channels_mask = BIT(0),
>  	.routes = {
> @@ -40,6 +50,7 @@ static const struct rzg2l_du_device_info rzg2l_du_r9a07g044_info = {
>  };
>  
>  static const struct of_device_id rzg2l_du_of_table[] = {
> +	{ .compatible = "renesas,r9a07g043u-du", .data = &rzg2l_du_r9a07g043u_info },
>  	{ .compatible = "renesas,r9a07g044-du", .data = &rzg2l_du_r9a07g044_info },
>  	{ /* sentinel */ }
>  };
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
> index 07b312b6f81e..b99217b4e05d 100644
> --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
> @@ -183,7 +183,8 @@ static int rzg2l_du_encoders_init(struct rzg2l_du_device *rcdu)
>  
>  		/* Find the output route corresponding to the port number. */
>  		for (i = 0; i < RZG2L_DU_OUTPUT_MAX; ++i) {
> -			if (rcdu->info->routes[i].port == ep.port) {
> +			if (rcdu->info->routes[i].possible_outputs &&
> +			    rcdu->info->routes[i].port == ep.port) {
>  				output = i;
>  				break;
>  			}

-- 
Regards,

Laurent Pinchart




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux