Hi Claudiu, > -----Original Message----- > From: Claudiu <claudiu.beznea@xxxxxxxxx> > Sent: Thursday, August 22, 2024 4:28 PM > Subject: [PATCH 07/16] reset: rzg2l-usbphy-ctrl: Get reset control array > > From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx> > > Before accessing the USB area of the RZ/G3S SoC the PWRRDY bit of the SYS_USB_PWRRDY register need to > be cleared. When USB area is not used the PWRRDY bit of the SYS_USB_PWRRDY register need to be set. > This register is in the SYSC controller address space and the assert/de-assert of the signal handled > by SYSC_USB_PWRRDY was implemented as a reset signal. > > The USB modules available on the RZ/G3S SoC that need this bit set are: > - USB ch0 (supporting host and peripheral mode) > - USB ch2 (supporting host mode) > - USBPHY control > > As the USBPHY control is the root device for all the other USB channels (USB ch0, USB ch1) add support > to set the PWRRDY for the USB area when initializing the USBPHY control. As this is done though reset > signals get the reset array in the USBPHY control driver. > Comment applicable, if the USB PWRRDY signal is modelled as reset signal. There is no user for this patch. The first user is RZ/G3S and is there is no support yet. I think you should merge this patch with next one so that there is a user(RZ/G3S) for this patch. Cheers, Biju > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx> > --- > drivers/reset/reset-rzg2l-usbphy-ctrl.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/reset/reset-rzg2l-usbphy-ctrl.c b/drivers/reset/reset-rzg2l-usbphy-ctrl.c > index 1cd157f4f03b..8b64c12f3bec 100644 > --- a/drivers/reset/reset-rzg2l-usbphy-ctrl.c > +++ b/drivers/reset/reset-rzg2l-usbphy-ctrl.c > @@ -132,7 +132,7 @@ static int rzg2l_usbphy_ctrl_probe(struct platform_device *pdev) > if (IS_ERR(regmap)) > return PTR_ERR(regmap); > > - priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); > + priv->rstc = devm_reset_control_array_get_exclusive(&pdev->dev); > if (IS_ERR(priv->rstc)) > return dev_err_probe(dev, PTR_ERR(priv->rstc), > "failed to get reset\n"); > -- > 2.39.2
