RE: [PATCH v2 3/3] i2c: jz4780: Use devm_clk_get_enabled() helpers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rong Qianfeng,

Thanks for the patch

> -----Original Message-----
> From: Rong Qianfeng <rongqianfeng@xxxxxxxx>
> Sent: Thursday, August 22, 2024 3:04 PM
> Subject: [PATCH v2 3/3] i2c: jz4780: Use devm_clk_get_enabled() helpers
> 
> The devm_clk_get_enabled() helpers:
>     - call devm_clk_get()
>     - call clk_prepare_enable() and register what is needed in order to
>      call clk_disable_unprepare() when needed, as a managed resource.
> 
> This simplifies the code and avoids the calls to clk_disable_unprepare().
> 
> While at it, no more special handling needed here, remove the goto label "err:".
> 
> Signed-off-by: Rong Qianfeng <rongqianfeng@xxxxxxxx>
> Acked-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> ---
>  drivers/i2c/busses/i2c-jz4780.c | 21 ++++++---------------
>  1 file changed, 6 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c index
> 4aafdfab6305..f5362c5dfb50 100644
> --- a/drivers/i2c/busses/i2c-jz4780.c
> +++ b/drivers/i2c/busses/i2c-jz4780.c
> @@ -792,26 +792,22 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
> 
>  	platform_set_drvdata(pdev, i2c);
> 
> -	i2c->clk = devm_clk_get(&pdev->dev, NULL);
> +	i2c->clk = devm_clk_get_enabled(&pdev->dev, NULL);
>  	if (IS_ERR(i2c->clk))
>  		return PTR_ERR(i2c->clk);
> 
> -	ret = clk_prepare_enable(i2c->clk);
> -	if (ret)
> -		return ret;
> -
>  	ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
>  				   &clk_freq);
>  	if (ret) {
>  		dev_err(&pdev->dev, "clock-frequency not specified in DT\n");
> -		goto err;
> +		return ret;

Nitpick:
Leaving it to you. 
If needed, you could send another patch to use dev_err_probe

if (ret)
	return dev_err_probe(&pdev->dev, ret, "clock-frequency not specified in DT\n");

>  	}
> 
>  	i2c->speed = clk_freq / 1000;
>  	if (i2c->speed == 0) {
>  		ret = -EINVAL;
>  		dev_err(&pdev->dev, "clock-frequency minimum is 1000\n");
		return dev_err_probe(&pdev->dev, -EINVAL, "clock-frequency minimum is 1000\n ");

Cheers,
Biju

> -		goto err;
> +		return ret;
>  	}
>  	jz4780_i2c_set_speed(i2c);
> 
> @@ -827,29 +823,24 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
> 
>  	ret = platform_get_irq(pdev, 0);
>  	if (ret < 0)
> -		goto err;
> +		return ret;
>  	i2c->irq = ret;
>  	ret = devm_request_irq(&pdev->dev, i2c->irq, jz4780_i2c_irq, 0,
>  			       dev_name(&pdev->dev), i2c);
>  	if (ret)
> -		goto err;
> +		return ret;
> 
>  	ret = i2c_add_adapter(&i2c->adap);
>  	if (ret < 0)
> -		goto err;
> +		return ret;
> 
>  	return 0;
> -
> -err:
> -	clk_disable_unprepare(i2c->clk);
> -	return ret;
>  }
> 
>  static void jz4780_i2c_remove(struct platform_device *pdev)  {
>  	struct jz4780_i2c *i2c = platform_get_drvdata(pdev);
> 
> -	clk_disable_unprepare(i2c->clk);
>  	i2c_del_adapter(&i2c->adap);
>  }
> 
> --
> 2.39.0






[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux