Re: [PATCH v2 7/8] thermal: trip: Get rid of thermal_zone_get_num_trips()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rafael,

Thanks for your work.

On 2024-07-29 18:11:29 +0200, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> 
> The only existing caller of thermal_zone_get_num_trips(), which is
> rcar_gen3_thermal_probe(), uses this function to put the number of
> trip points into a kernel log message, but this information is also
> available from the thermal sysfs interface.
> 
> For this reason, remove the thermal_zone_get_num_trips() call from
> rcar_gen3_thermal_probe() and drop the former altogether.
> 
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>

> ---
> 
> A new version, based on the discussion following the v1:
> 
> https://lore.kernel.org/linux-pm/20240617183949.GO382677@xxxxxxxxxxxx/
> 
> The Renesas driver change does not depend on the previous patches
> in the series.
> 
> ---
>  drivers/thermal/renesas/rcar_gen3_thermal.c |    6 +-----
>  drivers/thermal/thermal_trip.c              |    6 ------
>  include/linux/thermal.h                     |    1 -
>  3 files changed, 1 insertion(+), 12 deletions(-)
> 
> Index: linux-pm/drivers/thermal/renesas/rcar_gen3_thermal.c
> ===================================================================
> --- linux-pm.orig/drivers/thermal/renesas/rcar_gen3_thermal.c
> +++ linux-pm/drivers/thermal/renesas/rcar_gen3_thermal.c
> @@ -563,11 +563,7 @@ static int rcar_gen3_thermal_probe(struc
>  		if (ret)
>  			goto error_unregister;
>  
> -		ret = thermal_zone_get_num_trips(tsc->zone);
> -		if (ret < 0)
> -			goto error_unregister;
> -
> -		dev_info(dev, "Sensor %u: Loaded %d trip points\n", i, ret);
> +		dev_info(dev, "Sensor %u: Loaded\n", i);
>  	}
>  
>  	if (!priv->num_tscs) {
> Index: linux-pm/drivers/thermal/thermal_trip.c
> ===================================================================
> --- linux-pm.orig/drivers/thermal/thermal_trip.c
> +++ linux-pm/drivers/thermal/thermal_trip.c
> @@ -55,12 +55,6 @@ int thermal_zone_for_each_trip(struct th
>  }
>  EXPORT_SYMBOL_GPL(thermal_zone_for_each_trip);
>  
> -int thermal_zone_get_num_trips(struct thermal_zone_device *tz)
> -{
> -	return tz->num_trips;
> -}
> -EXPORT_SYMBOL_GPL(thermal_zone_get_num_trips);
> -
>  /**
>   * thermal_zone_set_trips - Computes the next trip points for the driver
>   * @tz: a pointer to a thermal zone device structure
> Index: linux-pm/include/linux/thermal.h
> ===================================================================
> --- linux-pm.orig/include/linux/thermal.h
> +++ linux-pm/include/linux/thermal.h
> @@ -210,7 +210,6 @@ int for_each_thermal_trip(struct thermal
>  int thermal_zone_for_each_trip(struct thermal_zone_device *tz,
>  			       int (*cb)(struct thermal_trip *, void *),
>  			       void *data);
> -int thermal_zone_get_num_trips(struct thermal_zone_device *tz);
>  void thermal_zone_set_trip_temp(struct thermal_zone_device *tz,
>  				struct thermal_trip *trip, int temp);
>  
> 
> 
> 

-- 
Kind Regards,
Niklas Söderlund




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux