From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> Document the device tree bindings for the Renesas RZ/V2H(P) SoC Clock Pulse Generator (CPG). CPG block handles the below operations: - Generation and control of clock signals for the IP modules - Generation and control of resets - Control over booting - Low power consumption and power supply domains Also define constants for the core clocks of the RZ/V2H(P) SoC. Note the core clocks are a subset of the ones which are listed as part of section 4.4.2 of HW manual Rev.1.01 which cannot be controlled by CLKON register. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> --- v4->v5 - Included RB tag from Geert v3->v4 - Included RB tag form Krzysztof - Changed reset and clock values to hex - Renamed __DT_BINDINGS_CLOCK_R9A09G057_CPG_H__ to __DT_BINDINGS_CLOCK_RENESAS_R9A09G057_CPG_H__ v2->v3 - Dropped '|' for CPG description - Dropped description for '#power-domain-cells' property - Added 3 clock inputs for CPG - Dropped label in example node - Used 4 spaces for example node - Renamed r9a09g057-cpg.h -> renesas,r9a09g057-cpg.h - Merged adding renesas,r9a09g057-cpg.h in DT binding patch - Updated commit message v1->v2 - Updated commit message - Updated description for binding as suggested by Geert - Updated descriptions for clocks and resets property - Renamed extal->qextal - Updated '#power-domain-cells' value --- .../bindings/clock/renesas,rzv2h-cpg.yaml | 80 +++++++++++++++++++ .../dt-bindings/clock/renesas,r9a09g057-cpg.h | 21 +++++ 2 files changed, 101 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml create mode 100644 include/dt-bindings/clock/renesas,r9a09g057-cpg.h diff --git a/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml new file mode 100644 index 000000000000..926c503bed1f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/renesas,rzv2h-cpg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2H(P) Clock Pulse Generator (CPG) + +maintainers: + - Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> + +description: + On Renesas RZ/V2H(P) SoCs, the CPG (Clock Pulse Generator) handles generation + and control of clock signals for the IP modules, generation and control of resets, + and control over booting, low power consumption and power supply domains. + +properties: + compatible: + const: renesas,r9a09g057-cpg + + reg: + maxItems: 1 + + clocks: + items: + - description: AUDIO_EXTAL clock input + - description: RTXIN clock input + - description: QEXTAL clock input + + clock-names: + items: + - const: audio_extal + - const: rtxin + - const: qextal + + '#clock-cells': + description: | + - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" + and a core clock reference, as defined in + <dt-bindings/clock/renesas,r9a09g057-cpg.h>, + - For module clocks, the two clock specifier cells must be "CPG_MOD" and + a module number. The module number is calculated as the CLKON register + offset index multiplied by 16, plus the actual bit in the register + used to turn the CLK ON. For example, for CGC_GIC_0_GICCLK, the + calculation is (1 * 16 + 3) = 0x13. + const: 2 + + '#power-domain-cells': + const: 0 + + '#reset-cells': + description: + The single reset specifier cell must be the reset number. The reset number + is calculated as the reset register offset index multiplied by 16, plus the + actual bit in the register used to reset the specific IP block. For example, + for SYS_0_PRESETN, the calculation is (3 * 16 + 0) = 0x30. + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#power-domain-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + clock-controller@10420000 { + compatible = "renesas,r9a09g057-cpg"; + reg = <0x10420000 0x10000>; + clocks = <&audio_extal_clk>, <&rtxin_clk>, <&qextal_clk>; + clock-names = "audio_extal", "rtxin", "qextal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; diff --git a/include/dt-bindings/clock/renesas,r9a09g057-cpg.h b/include/dt-bindings/clock/renesas,r9a09g057-cpg.h new file mode 100644 index 000000000000..541e6d719bd6 --- /dev/null +++ b/include/dt-bindings/clock/renesas,r9a09g057-cpg.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + * + * Copyright (C) 2024 Renesas Electronics Corp. + */ +#ifndef __DT_BINDINGS_CLOCK_RENESAS_R9A09G057_CPG_H__ +#define __DT_BINDINGS_CLOCK_RENESAS_R9A09G057_CPG_H__ + +#include <dt-bindings/clock/renesas-cpg-mssr.h> + +/* Core Clock list */ +#define R9A09G057_SYS_0_PCLK 0 +#define R9A09G057_CA55_0_CORE_CLK0 1 +#define R9A09G057_CA55_0_CORE_CLK1 2 +#define R9A09G057_CA55_0_CORE_CLK2 3 +#define R9A09G057_CA55_0_CORE_CLK3 4 +#define R9A09G057_CA55_0_PERIPHCLK 5 +#define R9A09G057_CM33_CLK0 6 +#define R9A09G057_CST_0_SWCLKTCK 7 +#define R9A09G057_IOTOP_0_SHCLK 8 + +#endif /* __DT_BINDINGS_CLOCK_RENESAS_R9A09G057_CPG_H__ */ -- 2.34.1
