Hi Laurent, Thanks for the feedback. > -----Original Message----- > From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > Sent: Saturday, July 27, 2024 2:12 AM > Subject: Re: [PATCH v2 8/9] arm64: dts: renesas: r9a07g043u: Add DU node > > Hi Biju, > > Thank you for the patch. > > On Tue, Jul 09, 2024 at 02:51:46PM +0100, Biju Das wrote: > > Add DU node to RZ/G2UL SoC DTSI. > > > > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> > > --- > > v1->v2: > > * No change. > > --- > > arch/arm64/boot/dts/renesas/r9a07g043u.dtsi | 25 > > +++++++++++++++++++++ > > 1 file changed, 25 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi > > b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi > > index d88bf23b0782..0a4f24d83791 100644 > > --- a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi > > +++ b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi > > @@ -153,6 +153,31 @@ fcpvd: fcp@10880000 { > > resets = <&cpg R9A07G043_LCDC_RESET_N>; > > }; > > > > + du: display@10890000 { > > + compatible = "renesas,r9a07g043u-du"; > > + reg = <0 0x10890000 0 0x10000>; > > + interrupts = <SOC_PERIPHERAL_IRQ(152) IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&cpg CPG_MOD R9A07G043_LCDC_CLK_A>, > > + <&cpg CPG_MOD R9A07G043_LCDC_CLK_P>, > > + <&cpg CPG_MOD R9A07G043_LCDC_CLK_D>; > > + clock-names = "aclk", "pclk", "vclk"; > > + power-domains = <&cpg>; > > + resets = <&cpg R9A07G043_LCDC_RESET_N>; > > + renesas,vsps = <&vspd 0>; > > + status = "disabled"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@1 { > > + reg = <1>; > > This may need to change depending on the outcome of the DT bindings discussion. Other than that, Agreed. Cheers, Biju > > Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> > > > + du_out_rgb: endpoint { > > + }; > > + }; > > + }; > > + }; > > + > > irqc: interrupt-controller@110a0000 { > > compatible = "renesas,r9a07g043u-irqc", > > "renesas,rzg2l-irqc"; > > -- > Regards, > > Laurent Pinchart