Describe the three General Purpose LEDs on the Gray Hawk Single board,
so they can be used as indicator LEDs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
.../dts/renesas/r8a779h0-gray-hawk-single.dts | 26 +++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
index b4fcf6c0cea26840..b8ed1d0edd5a92b5 100644
--- a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
+++ b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
@@ -10,6 +10,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include "r8a779h0.dtsi"
@@ -70,6 +71,31 @@ key-3 {
};
};
+ leds {
+ compatible = "gpio-leds";
+
+ led-1 {
+ gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <1>;
+ };
+
+ led-2 {
+ gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <2>;
+ };
+
+ led-3 {
+ gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <3>;
+ };
+ };
+
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
--
2.34.1
