Currently, all PLLs are modelled as fixed divider clocks, based on the state of the mode pins. However, the boot loader stack may have changed the actual PLL configuration from the default, leading to incorrect clock frequencies. Describe PLL1 as a fixed fractional PLL instead, and PLL2, PLL3, and PLL6 as variable fractional PLLs. Note that the R-Car Gen4 clock driver does not support variable 9.24 PLLs yet, so the driver will downgrade them to fixed fractional PLLs, too. Reformat nearby lines to retain a consistent layout. Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> --- drivers/clk/renesas/r8a779f0-cpg-mssr.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/clk/renesas/r8a779f0-cpg-mssr.c b/drivers/clk/renesas/r8a779f0-cpg-mssr.c index f05390558a22a367..46b21cca7409010f 100644 --- a/drivers/clk/renesas/r8a779f0-cpg-mssr.c +++ b/drivers/clk/renesas/r8a779f0-cpg-mssr.c @@ -57,12 +57,12 @@ static const struct cpg_core_clk r8a779f0_core_clks[] __initconst = { DEF_INPUT("extalr", CLK_EXTALR), /* Internal Core Clocks */ - DEF_BASE(".main", CLK_MAIN, CLK_TYPE_GEN4_MAIN, CLK_EXTAL), - DEF_BASE(".pll1", CLK_PLL1, CLK_TYPE_GEN4_PLL1, CLK_MAIN), - DEF_BASE(".pll2", CLK_PLL2, CLK_TYPE_GEN4_PLL2, CLK_MAIN), - DEF_BASE(".pll3", CLK_PLL3, CLK_TYPE_GEN4_PLL3, CLK_MAIN), - DEF_BASE(".pll5", CLK_PLL5, CLK_TYPE_GEN4_PLL5, CLK_MAIN), - DEF_BASE(".pll6", CLK_PLL6, CLK_TYPE_GEN4_PLL6, CLK_MAIN), + DEF_BASE(".main", CLK_MAIN, CLK_TYPE_GEN4_MAIN, CLK_EXTAL), + DEF_GEN4_PLL_F9_24(".pll1", 1, CLK_PLL1, CLK_MAIN), + DEF_GEN4_PLL_V9_24(".pll2", 2, CLK_PLL2, CLK_MAIN), + DEF_GEN4_PLL_V9_24(".pll3", 3, CLK_PLL3, CLK_MAIN), + DEF_BASE(".pll5", CLK_PLL5, CLK_TYPE_GEN4_PLL5, CLK_MAIN), + DEF_GEN4_PLL_V9_24(".pll6", 6, CLK_PLL6, CLK_MAIN), DEF_FIXED(".pll1_div2", CLK_PLL1_DIV2, CLK_PLL1, 2, 1), DEF_FIXED(".pll2_div2", CLK_PLL2_DIV2, CLK_PLL2, 2, 1), -- 2.34.1