[PATCH] i2c: rcar: clear NO_RXDMA flag after resetting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We should allow RXDMA only if the reset was really successful, so clear
the flag after the reset call.

Fixes: 0e864b552b23 ("i2c: rcar: reset controller is mandatory for Gen3+")
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-rcar.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 29c7fafeb8a9..8f2ede534f30 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -912,10 +912,10 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
 
 	/* Gen3+ needs a reset. That also allows RXDMA once */
 	if (priv->devtype >= I2C_RCAR_GEN3) {
-		priv->flags &= ~ID_P_NO_RXDMA;
 		ret = rcar_i2c_do_reset(priv);
 		if (ret)
 			goto out;
+		priv->flags &= ~ID_P_NO_RXDMA;
 	}
 
 	rcar_i2c_init(priv);
-- 
2.43.0





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux