Hi Claudiu,
> -----Original Message-----
> From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
> Sent: Friday, June 28, 2024 9:13 AM
> Subject: Re: [PATCH v2 07/12] i2c: riic: Define individual arrays to describe the register offsets
>
>
>
> On 28.06.2024 11:09, Biju Das wrote:
> >
> > Hi Claudiu,
> >
> >> -----Original Message-----
> >> From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
> >> Sent: Friday, June 28, 2024 9:03 AM
> >> Subject: Re: [PATCH v2 07/12] i2c: riic: Define individual arrays to
> >> describe the register offsets
> >>
> >>
> >>
> >> On 28.06.2024 10:55, Biju Das wrote:
> >>> Hi Claudiu,
> >>>
> >>>> -----Original Message-----
> >>>> From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
> >>>> Sent: Friday, June 28, 2024 8:32 AM
> >>>> Subject: Re: [PATCH v2 07/12] i2c: riic: Define individual arrays
> >>>> to describe the register offsets
> >>>>
> >>>> Hi, Biju,
> >>>>
> >>>> On 28.06.2024 08:59, Biju Das wrote:
> >>>>> Hi Claudiu,
> >>>>>
> >>>>>> -----Original Message-----
> >>>>>> From: Claudiu <claudiu.beznea@xxxxxxxxx>
> >>>>>> Sent: Tuesday, June 25, 2024 1:14 PM
> >>>>>> Subject: [PATCH v2 07/12] i2c: riic: Define individual arrays to
> >>>>>> describe the register offsets
> >>>>>>
> >>>>>> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> >>>>>>
> >>>>>> Define individual arrays to describe the register offsets. In
> >>>>>> this way we can describe different IP variants that share the
> >>>>>> same register offsets but have differences in other characteristics.
> >>>>>> Commit prepares for the addition
> >>>> of fast mode plus.
> >>>>>>
> >>>>>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> >>>>>> ---
> >>>>>>
> >>>>>> Changes in v2:
> >>>>>> - none
> >>>>>>
> >>>>>> drivers/i2c/busses/i2c-riic.c | 58
> >>>>>> +++++++++++++++++++----------------
> >>>>>> 1 file changed, 31 insertions(+), 27 deletions(-)
> >>>>>>
> >>>>>> diff --git a/drivers/i2c/busses/i2c-riic.c
> >>>>>> b/drivers/i2c/busses/i2c-riic.c index
> >>>>>> 9fe007609076..8ffbead95492 100644
> >>>>>> --- a/drivers/i2c/busses/i2c-riic.c
> >>>>>> +++ b/drivers/i2c/busses/i2c-riic.c
> >>>>>> @@ -91,7 +91,7 @@ enum riic_reg_list { };
> >>>>>>
> >>>>>> struct riic_of_data {
> >>>>>> - u8 regs[RIIC_REG_END];
> >>>>>> + const u8 *regs;
> >>>>>
> >>>>>
> >>>>> Since you are touching this part, can we drop struct and Use u8*
> >>>>> as device_data instead?
> >>>>
> >>>> Patch 09/12 "i2c: riic: Add support for fast mode plus" adds a new
> >>>> member to struct
> >> riic_of_data.
> >>>> That new member is needed to differentiate b/w hardware versions
> >>>> supporting fast mode plus based on compatible.
> >>>
> >>> Are we sure RZ/A does not support fast mode plus?
> >>
> >> From commit description of patch 09/12:
> >>
> >> Fast mode plus is available on most of the IP variants that RIIC
> >> driver is working with. The exception is (according to HW manuals of the SoCs where this IP is
> available) the Renesas RZ/A1H.
> >> For this, patch introduces the struct riic_of_data::fast_mode_plus.
> >>
> >> I checked the manuals of all the SoCs where this driver is used.
> >>
> >> I haven't checked the H/W manual?
> >>
> >> On the manual I've downloaded from Renesas web site the FMPE bit of
> >> RIICnFER is not available on RZ/A1H.
> >
> > I just found RZ/A2M manual, it supports FMP and register layout looks similar to RZ/G2L.
>
> I introduced struct riic_of_data::fast_mode_plus because of RZ/A1H.
Maybe make the register layout as per SoC
RZ/A1 --> &riic_rz_a_info
RZ/A2 and RZ/{G2L,G2LC,V2L,G2UL,FIVE} --> &riic_rz_g2_info
RZ/G3S and RZ/V2H --> &riic_rz_v2h_info
Then except RZ/A1, set FMP.
Currently register layout of RZ/A2 is not matching with
Hardware manual.
Cheers,
Biju
