As per the latest HW manual[1], there is an internal delay(~250 microsec) from setting ALME = 0 to disabling the alarm function, so the user must add a short delay of greater than 250µs between setting ALME = 0 and clearing ALM. Currently setting of ALME = 0 is done after clearing the ALM, so just reverse the operation and add a delay of 275 microsec. [1]https://www.renesas.com/us/en/document/dst/raa215300-datasheet?r=1506351 Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> --- drivers/rtc/rtc-isl1208.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c index c58063d917d6..3df5605134fa 100644 --- a/drivers/rtc/rtc-isl1208.c +++ b/drivers/rtc/rtc-isl1208.c @@ -663,6 +663,13 @@ isl1208_rtc_interrupt(int irq, void *data) rtc_update_irq(isl1208->rtc, 1, RTC_IRQF | RTC_AF); + /* Disable the alarm */ + err = isl1208_rtc_toggle_alarm(client, 0); + if (err) + return err; + + fsleep(275); + /* Clear the alarm */ sr &= ~ISL1208_REG_SR_ALM; sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr); @@ -671,11 +678,6 @@ isl1208_rtc_interrupt(int irq, void *data) __func__); else handled = 1; - - /* Disable the alarm */ - err = isl1208_rtc_toggle_alarm(client, 0); - if (err) - return err; } if (isl1208->config->has_tamper && (sr & ISL1208_REG_SR_EVT)) { -- 2.43.0
