On 17.06.2024 10:16, claudiu beznea wrote:
>
>
> On 16.06.2024 10:38, Krzysztof Kozlowski wrote:
>> On 14/06/2024 09:19, Claudiu wrote:
>>> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>>
>>> +
>>> +maintainers:
>>> + - Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>>> +
>>> +properties:
>>> + compatible:
>>> + items:
>>> + - const: renesas,rzg3s-vbattb
>>> + - const: syscon
>>> + - const: simple-mfd
>>
>> No, mfd does no look good. That's not a simple device anymore and you
>> claim here child does not need vbat bclk, power domains and resets? That
>> would be a big surprise, although technically possible.
>
> I wasn't sure how this MFD will be received by the Renesas maintainers so I
> kept it simple for this version.
>
> In theory the VBAT clk, power domain and resets are specific to VBAT module
> itself but, indeed, the child cannot work w/o these.
>
>>
>> Please clarify: which of parent resources are needed for children?
>
> VBAT clock, power domain are needed. Reset, too. In the current
> implementation the reset is deasserted though parent by calling the
> syscon_node_to_regmap(np->parent) in the clock driver.
>
>>
>> ...
>>
>>> +
>>> +additionalProperties: false
>>> +
>>> +examples:
>>> + - |
>>> + #include <dt-bindings/clock/r9a08g045-cpg.h>
>>> + #include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +
>>> + vbattb: vbattb@1005c000 {
>>> + compatible = "renesas,rzg3s-vbattb", "syscon", "simple-mfd";
>>> + reg = <0x1005c000 0x1000>;
>>> + ranges = <0 0 0x1005c000 0 0x1000>;
>>> + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
>>> + interrupt-names = "tampdi";
>>> + clocks = <&cpg CPG_MOD R9A08G045_VBAT_BCLK>;
>>> + clock-names = "bclk";
>>> + power-domains = <&cpg>;
>>> + resets = <&cpg R9A08G045_VBAT_BRESETN>;
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> + status = "disabled";
>>
>> Drop
>
> Could you please clarify this? Would you want me to drop the full node
> (same for clock-controller node)?
Looking at your review on patch 05/12 from this series I noticed you're
taking about the status = "disabled" lines.
I'll drop it as suggested.
Thank you,
Claudiu Beznea
>
> Can you point me an example that you are thinking about?
>
> Thank you,
> Claudiu Beznea
>
>>
>>> +
>>> + vbattclk: clock-controller@1c {
>>> + compatible = "renesas,rzg3s-vbattb-clk";
>>> + reg = <0 0x1c 0 0x10>;
>>> + clocks = <&cpg CPG_MOD R9A08G045_VBAT_BCLK>, <&vbattb_xtal>;
>>> + clock-names = "bclk", "vbattb_xtal";
>>> + #clock-cells = <0>;
>>> + power-domains = <&cpg>;
>>> + status = "disabled";
>>
>> Drop
>>
>>> + };
>>> + };
>>> +
>>> +...
>>
>> Best regards,
>> Krzysztof
>>
