The RX frame size limit should not be based on the current MTU setting.
Instead it should be based on the hardware capabilities.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Paul Barker <paul.barker.ct@xxxxxxxxxxxxxx>
---
drivers/net/ethernet/renesas/ravb_main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 02cbf850bd85..481c854cb305 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -555,8 +555,10 @@ static void ravb_emac_init_gbeth(struct net_device *ndev)
static void ravb_emac_init_rcar(struct net_device *ndev)
{
+ struct ravb_private *priv = netdev_priv(ndev);
+
/* Receive frame limit set register */
- ravb_write(ndev, ndev->mtu + ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN, RFLR);
+ ravb_write(ndev, priv->info->rx_max_frame_size + ETH_FCS_LEN, RFLR);
/* EMAC Mode: PAUSE prohibition; Duplex; RX Checksum; TX; RX */
ravb_write(ndev, ECMR_ZPF | ECMR_DM |
--
2.39.2
