Align ravb_poll() with the documentation in `Documentation/networking/kapi.rst` and `Documentation/networking/napi.rst`. The documentation says that we should prefer napi_complete_done() over napi_complete(), and using the former allows us to properly support busy polling. We should ensure that napi_complete_done() is only called if the work budget has not been exhausted, and we should only re-arm interrupts if it returns true. Signed-off-by: Paul Barker <paul.barker.ct@xxxxxxxxxxxxxx> --- Changes v4->v5: * Re-wrote the commit message to make things clearer. Changes v3->v4: * Used Niklas' suggested commit message. drivers/net/ethernet/renesas/ravb_main.c | 26 ++++++++++-------------- 1 file changed, 11 insertions(+), 15 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 193ad05383a8..472aa80002be 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1341,23 +1341,19 @@ static int ravb_poll(struct napi_struct *napi, int budget) if (priv->rx_fifo_errors != ndev->stats.rx_fifo_errors) ndev->stats.rx_fifo_errors = priv->rx_fifo_errors; - if (work_done == budget) - goto out; - - napi_complete(napi); - - /* Re-enable RX/TX interrupts */ - spin_lock_irqsave(&priv->lock, flags); - if (!info->irq_en_dis) { - ravb_modify(ndev, RIC0, mask, mask); - ravb_modify(ndev, TIC, mask, mask); - } else { - ravb_write(ndev, mask, RIE0); - ravb_write(ndev, mask, TIE); + if (work_done < budget && napi_complete_done(napi, work_done)) { + /* Re-enable RX/TX interrupts */ + spin_lock_irqsave(&priv->lock, flags); + if (!info->irq_en_dis) { + ravb_modify(ndev, RIC0, mask, mask); + ravb_modify(ndev, TIC, mask, mask); + } else { + ravb_write(ndev, mask, RIE0); + ravb_write(ndev, mask, TIE); + } + spin_unlock_irqrestore(&priv->lock, flags); } - spin_unlock_irqrestore(&priv->lock, flags); -out: return work_done; } -- 2.39.2