[DO NOT MERGE v8 22/36] dt-bindings: display: smi,sm501: SMI SM501 binding json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx>
---
 .../bindings/display/smi,sm501.yaml           | 443 ++++++++++++++++++
 1 file changed, 443 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/smi,sm501.yaml

diff --git a/Documentation/devicetree/bindings/display/smi,sm501.yaml b/Documentation/devicetree/bindings/display/smi,sm501.yaml
new file mode 100644
index 000000000000..c3ab0f08a894
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/smi,sm501.yaml
@@ -0,0 +1,443 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/smi,sm501.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Motion SM501 Mobile Multimedia Companion Chip
+
+maintainers:
+  - Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxx>
+
+description:
+  Silicon Motion Inc, SM501 Companion Chip.
+
+definitions:
+  fb-flag:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Display initialize flags.
+    items:
+      anyOf:
+        - const: use-init-done
+        - const: disable-at-exit
+        - const: use-hwcursor
+        - const: use-hwaccel
+        - const: panel-no-fpen
+        - const: panel-no-vbiasen
+        - const: panel-inv-fpen
+        - const: panel-inv-vbiasen
+    maxItems: 8
+
+properties:
+  compatible:
+    const:
+      smi,sm501
+
+  reg:
+    maxItems: 2
+    description:
+      First entry - System Configuration registers
+      Second entry - IO space (Display Controller register)
+
+  interrupts:
+    description: SM501 interrupt to the cpu should be described here.
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: mclk
+      - const: m1xclk
+
+  mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Select a video mode
+
+  edid:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Verbatim EDID data block describing attached display.
+      Data from the detailed timing descriptor will be used to
+      program the display controller.
+
+  smi,little-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: available on big endian systems, to set different foreign endian.
+  smi,big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: available on little endian systems, to set different foreign endian.
+
+  smi,swap-fb-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: swap framebuffer byteorder.
+
+  route-crt-panel:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Panel output merge to CRT.
+
+  crt:
+    type: object
+    description: CRT output control
+    properties:
+      smi,flags:
+        $ref: "#/definitions/fb-flag"
+
+      bpp:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Color depth
+
+  panel:
+    type: object
+    description: Panel output control
+    properties:
+      smi,flags:
+        $ref: "#/definitions/fb-flag"
+
+      bpp:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Color depth
+
+  smi,devices:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Select SM501 device functions.
+    items:
+      anyOf:
+        - const: usb-host
+        - const: usb-slave
+        - const: ssp0
+        - const: ssp1
+        - const: uart0
+        - const: uart1
+        - const: fbaccel
+        - const: ac97
+        - const: i2s
+    minItems: 1
+    maxItems: 9
+
+  smi,misc-timing-ex:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Miscellaneous Timing - Extend bus holding time.
+    enum:
+      - none
+      - "16"
+      - "32"
+      - "48"
+      - "64"
+      - "80"
+      - "96"
+      - "112"
+      - "128"
+      - "144"
+      - "160"
+      - "176"
+      - "192"
+      - "208"
+      - "224"
+      - "240"
+
+  smi,misc-timing-xc:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Miscellaneous Timing - Xscale clock input select.
+    enum:
+      - internal-pll
+      - hclk
+      - gpio30
+
+  smi,misc-timing-usb-current:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Miscellaneous Timing - USB host current detection.
+    enum:
+      - disable
+      - enable
+
+  smi,misc-timing-ssm1:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Miscellaneous Timing - System SDRAM Clock Select for PW Mode 1.
+    enum:
+      - "288"
+      - divider
+
+  smi,misc-timing-sm1:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Miscellaneous Timing - SDRAM clock divider for PW mode 1.
+    enum:
+      - "1"
+      - "2"
+      - "3"
+      - "4"
+      - "6"
+      - "8"
+      - "12"
+      - "16"
+      - "24"
+      - "32"
+      - "48"
+      - "64"
+      - "96"
+      - "128"
+      - "192"
+      - "384"
+
+  smi,misc-timing-ssm0:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Miscellaneous Timing - System SDRAM Clock Select for PW Mode 0.
+    enum:
+      - "288"
+      - divider
+
+  smi,misc-timing-sm0:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Miscellaneous Timing - SDRAM clock divider for PW mode 0.
+    enum:
+      - "1"
+      - "2"
+      - "3"
+      - "4"
+      - "6"
+      - "8"
+      - "12"
+      - "16"
+      - "24"
+      - "32"
+      - "48"
+      - "64"
+      - "96"
+      - "128"
+      - "192"
+      - "384"
+
+  smi,misc-timing-deb:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Miscellaneous Timing - 96MHz PLL debug control
+    enum:
+      - input-reference
+      - output
+
+  smi,misc-timing-a:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Miscellaneous Timing - ACPI Control.
+    enum:
+      - no-acpi
+      - acpi
+
+  smi,misc-timing-divider:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Miscellaneous Timing - Output Frequency Selection for Second PLL.
+    enum:
+      - "336"
+      - "288"
+      - "240"
+      - "192"
+
+  smi,misc-timing-u:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Miscellaneous Timing - USB Host mode.
+    enum:
+      - normal
+      - simulation
+
+  smi,misc-timing-delay:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Miscellaneous Timing - Delay time to latch read data for external SDRAM memory controller.
+    enum:
+      - none
+      - "0.5"
+      - "1.0"
+      - "1.5"
+      - "2.0"
+      - "2.5"
+
+  smi,misc-control-pad:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Micellaneous Control - PCI Pad drive strength.
+    enum:
+      - "24"
+      - "12"
+      - "8"
+
+  smi,misc-control-usbclk:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Micellaneous Control - USB Clcok Select.
+    enum:
+      - xtal
+      - "96"
+      - "48"
+
+  smi,misc-control-ssp:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Micellaneous Control - UART1/SSP1 Select.
+    enum:
+      - uart1
+      - ssp1
+
+  smi,misc-control-lat:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Micellaneous Control - 8051 Latch Enable for Address.
+    enum:
+      - disable
+      - enable
+
+  smi,misc-control-fp:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Micellaneous Control - Flat Panel Data Select.
+    enum:
+      - "18"
+      - "24"
+
+  smi,misc-control-freq:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Micellaneous Control - Crystal frequency select.
+    enum:
+      - "24"
+      - "12"
+
+  smi,misc-control-refresh:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Micellaneous Control - Internal memory refresh control
+    enum:
+      - "8"
+      - "16"
+      - "32"
+      - "64"
+
+  smi,misc-control-hold:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Micellaneous Control - BUS Hold time.
+    enum:
+      - fifo-empty
+      - "8"
+      - "16"
+      - "24"
+      - "32"
+
+  smi,misc-control-sh:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Micellaneous Control - Renesas SuperH ready polarity.
+    enum:
+      - active-low
+      - active-high
+
+  smi,misc-control-ii:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Micellaneous Control - Interrupt inverting.
+    enum:
+      - normal
+      - inverted
+
+  smi,misc-control-pll:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Micellaneous Control - PLL clock count.
+    enum:
+      - disable
+      - enable
+
+  smi,misc-control-gap:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Micellaneous Control - DAC Band Gap Control.
+    const: "0"
+
+  smi,misc-control-dac:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Micellaneous Control - DAC Power control.
+    enum:
+      - disable
+      - enable
+
+  smi,misc-control-mc:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Micellaneous Control - USB slave controller.
+    enum:
+      - cpu
+      - "8051"
+
+  smi,misc-control-bl:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Micellaneous Control - CPU Master burst length.
+    enum:
+      - "1"
+      - "8"
+
+  smi,misc-control-usb:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Micellaneous Control - USB port select.
+    enum:
+      - master
+      - slave
+
+  smi,misc-control-vr:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Micellaneous Control - NEC VR Memory map select.
+    enum:
+      - "0x1e00000"
+      - "0x3e00000"
+
+  gpio:
+    type: object
+    description: GPIO pin control
+    additionalProperties: false
+    patternProperties:
+      "^pin-[0-9]+$":
+        $ref: /schemas/types.yaml#/definitions/string
+        enum:
+          - ioport
+          - function
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+
+examples:
+  - |
+        display@10000000 {
+                compatible = "smi,sm501";
+                reg = <0x10000000 0x03e00000
+                       0x13e00000 0x00200000>;
+                interrupt-parent = <&r2dintc>;
+                interrupts = <4 0>;
+                clocks = <&mclk &m1xclk>;
+                clock-names = "mclk", "m1xclk";
+                mode = "640x480-16@60";
+                smi,little-endian;
+                smi,devices = "usb-host", "uart0";
+                smi,swap-fb-endian;
+                edid = [00 ff ff ff ff ff ff 00 00 00 00 00 00 00 00 00
+                        00 00 01 04 00 00 00 00 00 00 00 00 00 00 00 00
+                        00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                        00 00 00 00 00 00 f0 0a 80 fb 20 e0 25 10 32 60
+                        02 00 00 00 00 00 00 06 00 00 00 00 00 00 00 00
+                        00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                        00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                        00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 bd];
+
+                smi,misc-timing-ex = "16";
+                smi,misc-timing-xc = "internal-pll";
+                smi,misc-timing-usb-current = "disable";
+                smi,misc-control-pad = "24";
+                smi,misc-control-usbclk = "xtal";
+                smi,misc-control-sh = "active-low";
+
+                gpio {
+                        pin-0 = "ioport";
+                        pin-1 = "function";
+                };
+
+                crt {
+                        smi,flags = "use-init-done",
+                                    "disable-at-exit",
+                                    "use-hwcursor",
+                                    "use-hwaccel";
+                };
+
+                panel {
+                        bpp = <16>;
+                        smi,flags = "use-init-done",
+                                    "disable-at-exit",
+                                    "use-hwcursor",
+                                    "use-hwaccel";
+                };
+        };
-- 
2.39.2





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux