[PATCH 3/3] arm64: dts: renesas: gray-hawk-csi-dsi: Add and connect MAX96724

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The sub-board contains two MAX96724 connected to the main-board using
I2C and CSI-2, record the connections. Also enable all nodes (VIN, CSI-2
and ISP) that are part of the downstream video capture pipeline.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
---
 .../boot/dts/renesas/gray-hawk-csi-dsi.dtsi   | 185 ++++++++++++++++++
 1 file changed, 185 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/gray-hawk-csi-dsi.dtsi b/arch/arm64/boot/dts/renesas/gray-hawk-csi-dsi.dtsi
index 68a37e2077e1..61bea35aebdc 100644
--- a/arch/arm64/boot/dts/renesas/gray-hawk-csi-dsi.dtsi
+++ b/arch/arm64/boot/dts/renesas/gray-hawk-csi-dsi.dtsi
@@ -6,7 +6,63 @@
  * Copyright (C) 2024 Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
  */
 
+#include <dt-bindings/media/video-interfaces.h>
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi40_in: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max96724_out0>;
+			};
+		};
+	};
+};
+
+&csi41 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi41_in: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max96724_out1>;
+			};
+		};
+	};
+};
+
 &i2c0 {
+	pca9654_a: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9654_b: gpio@22 {
+		compatible = "onnn,pca9654";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	eeprom@52 {
 		compatible = "rohm,br24g01", "atmel,24c01";
 		label = "csi-dsi-sub-board-id";
@@ -14,3 +70,132 @@ eeprom@52 {
 		pagesize = <8>;
 	};
 };
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	gmsl0: gmsl-deserializer@4e {
+		compatible = "maxim,max96724";
+		reg = <0x4e>;
+		enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@4 {
+				reg = <4>;
+				max96724_out0: endpoint {
+					bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csi40_in>;
+				};
+			};
+		};
+	};
+
+	gmsl1: gmsl-deserializer@4f {
+		compatible = "maxim,max96724";
+		reg = <0x4f>;
+		enable-gpios = <&pca9654_b 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@4 {
+				reg = <4>;
+				max96724_out1: endpoint {
+					bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csi41_in>;
+				};
+			};
+		};
+	};
+};
+
+&isp0 {
+	status = "okay";
+};
+
+&isp1 {
+	status = "okay";
+};
+
+&pfc {
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+};
+
+&vin00 {
+	status = "okay";
+};
+
+&vin01 {
+	status = "okay";
+};
+
+&vin02 {
+	status = "okay";
+};
+
+&vin03 {
+	status = "okay";
+};
+
+&vin04 {
+	status = "okay";
+};
+
+&vin05 {
+	status = "okay";
+};
+
+&vin06 {
+	status = "okay";
+};
+
+&vin07 {
+	status = "okay";
+};
+
+&vin08 {
+	status = "okay";
+};
+
+&vin09 {
+	status = "okay";
+};
+
+&vin10 {
+	status = "okay";
+};
+
+&vin11 {
+	status = "okay";
+};
+
+&vin12 {
+	status = "okay";
+};
+
+&vin13 {
+	status = "okay";
+};
+
+&vin14 {
+	status = "okay";
+};
+
+&vin15 {
+	status = "okay";
+};
-- 
2.45.1





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux