The I2C EEPROM U197 on Condor is also present on Condor-I, but it was moved to the other side of the bi-directional voltage-level translator on I2C bus zero, and relabeled to U230. Move it to condor-common.dtsi to make it available on Condor-I, too. Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> --- To be queued in renesas-devel for v6.11. arch/arm64/boot/dts/renesas/condor-common.dtsi | 6 ++++++ arch/arm64/boot/dts/renesas/r8a77980-condor.dts | 8 -------- 2 files changed, 6 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/condor-common.dtsi b/arch/arm64/boot/dts/renesas/condor-common.dtsi index 7c34d14dcd7e1ca0..8b7c0c34eadce5cb 100644 --- a/arch/arm64/boot/dts/renesas/condor-common.dtsi +++ b/arch/arm64/boot/dts/renesas/condor-common.dtsi @@ -227,6 +227,12 @@ adv7511_out: endpoint { }; }; }; + + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; }; &i2c1 { diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index 68d1f1d53b3a38b4..1d326552e2facd06 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -14,11 +14,3 @@ / { model = "Renesas Condor board based on r8a77980"; compatible = "renesas,condor", "renesas,r8a77980"; }; - -&i2c0 { - eeprom@50 { - compatible = "rohm,br24t01", "atmel,24c01"; - reg = <0x50>; - pagesize = <8>; - }; -}; -- 2.34.1