RE: [PATCH v7 6/7] PCI: rcar-gen4: Add support for r8a779g0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Manivannan,

> From: Manivannan Sadhasivam, Sent: Saturday, May 11, 2024 5:03 PM
> 
> On Mon, Apr 15, 2024 at 05:11:34PM +0900, Yoshihiro Shimoda wrote:
> > This driver previously supported r8a779f0 (R-Car S4-8). Add support
> > for r8a779g0 (R-Car V4H). PCIe features of both r8a779f0 and r8a779g0
> > are almost all the same. For example:
> >  - PCI Express Base Specification Revision 4.0
> >  - Root complex mode and endpoint mode are supported
> >
> > However, r8a779g0 requires specific firmware downloading, to
> > initialize the PHY. Otherwise, the PCIe controller cannot work.
> > The firmware is attached in the manual of the r8a779g0 as text.
> > So, convert it to a binary file by using a script.
> 
> The firmware is expected to be present in userspace. So where is it btw? Is it
> upstreamed to linux-firmware?

I may misunderstand your question, but the firmware is in the SoC's datasheet as
a text file. So, we need to convert it to a binary file and store it into the rootfs.
(Also, for debug purpose, we can use built-in firmware from "CONFIG_EXTRA_FIRMWARE".)

> You cannot ask users to manually copy the text and convert it to a binary file.
> But if the firmware or sequence is not going to change, why can't you hardcode
> it in the driver itself?

This is because that Renesas is not able to distribute the firmware freely.

> >
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> > ---
> >  drivers/pci/controller/dwc/pcie-rcar-gen4.c | 201 +++++++++++++++++++-
> >  1 file changed, 200 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-rcar-gen4.c b/drivers/pci/controller/dwc/pcie-rcar-gen4.c
> > index 980a916933d6..4e934e9156f2 100644
> > --- a/drivers/pci/controller/dwc/pcie-rcar-gen4.c
> > +++ b/drivers/pci/controller/dwc/pcie-rcar-gen4.c
> > @@ -5,8 +5,10 @@
> >   */
> >
> >  #include <linux/delay.h>
> > +#include <linux/firmware.h>
> >  #include <linux/interrupt.h>
> >  #include <linux/io.h>
> > +#include <linux/iopoll.h>
> >  #include <linux/module.h>
> >  #include <linux/of.h>
> >  #include <linux/pci.h>
> > @@ -20,9 +22,10 @@
> >  /* Renesas-specific */
> >  /* PCIe Mode Setting Register 0 */
> >  #define PCIEMSR0		0x0000
> > -#define BIFUR_MOD_SET_ON	BIT(0)
> > +#define APP_SRIS_MODE		BIT(6)
> >  #define DEVICE_TYPE_EP		0
> >  #define DEVICE_TYPE_RC		BIT(4)
> > +#define BIFUR_MOD_SET_ON	BIT(0)
> >
> >  /* PCIe Interrupt Status 0 */
> >  #define PCIEINTSTS0		0x0084
> > @@ -37,19 +40,47 @@
> >  #define PCIEDMAINTSTSEN		0x0314
> >  #define PCIEDMAINTSTSEN_INIT	GENMASK(15, 0)
> >
> > +/* Port Logic Registers 89 */
> > +#define PRTLGC89		0x0b70
> > +
> > +/* Port Logic Registers 90 */
> > +#define PRTLGC90		0x0b74
> > +
> >  /* PCIe Reset Control Register 1 */
> >  #define PCIERSTCTRL1		0x0014
> >  #define APP_HOLD_PHY_RST	BIT(16)
> >  #define APP_LTSSM_ENABLE	BIT(0)
> >
> > +/* PCIe Power Management Control */
> > +#define PCIEPWRMNGCTRL		0x0070
> > +#define APP_CLK_REQ_N		BIT(11)
> > +#define APP_CLK_PM_EN		BIT(10)
> > +
> > +/*
> > + * The R-Car Gen4 documents don't describe the PHY registers' name.
> > + * But, the initialization procedure describes these offsets. So,
> > + * this driver makes up own #defines for the offsets.
> > + */
> > +#define RCAR_GEN4_PCIE_PHY_0f8	0x0f8
> > +#define RCAR_GEN4_PCIE_PHY_148	0x148
> > +#define RCAR_GEN4_PCIE_PHY_1d4	0x1d4
> > +#define RCAR_GEN4_PCIE_PHY_514	0x514
> > +#define RCAR_GEN4_PCIE_PHY_700	0x700
> > +
> 
> As I said before, these defines provide no information about the registers at
> all. So please use the offset directly and add a comment.

I got it.

> >  #define RCAR_NUM_SPEED_CHANGE_RETRIES	10
> >  #define RCAR_MAX_LINK_SPEED		4
> >
> >  #define RCAR_GEN4_PCIE_EP_FUNC_DBI_OFFSET	0x1000
> >  #define RCAR_GEN4_PCIE_EP_FUNC_DBI2_OFFSET	0x800
> >
> > +#define RCAR_GEN4_PCIE_FIRMWARE_NAME		"rcar_gen4_pcie.bin"
> > +#define RCAR_GEN4_PCIE_FIRMWARE_BASE_ADDR	0xc000
> > +
> > +MODULE_FIRMWARE(RCAR_GEN4_PCIE_FIRMWARE_NAME);
> > +
> >  struct rcar_gen4_pcie;
> >  struct rcar_gen4_pcie_drvdata {
> > +	void (*additional_common_init)(struct rcar_gen4_pcie *rcar);
> 
> What is this init for? Controller? PHY?

This init is for controller.

> >  	int (*ltssm_enable)(struct rcar_gen4_pcie *rcar);
> >  	enum dw_pcie_device_mode mode;
> >  };
> > @@ -57,12 +88,144 @@ struct rcar_gen4_pcie_drvdata {
> >  struct rcar_gen4_pcie {
> >  	struct dw_pcie dw;
> >  	void __iomem *base;
> > +	void __iomem *phy_base;
> >  	struct platform_device *pdev;
> >  	const struct rcar_gen4_pcie_drvdata *drvdata;
> >  };
> >  #define to_rcar_gen4_pcie(_dw)	container_of(_dw, struct rcar_gen4_pcie, dw)
> >
> >  /* Common */
> > +static void rcar_gen4_pcie_phy_reg_update_bits(struct rcar_gen4_pcie *rcar,
> > +					       u32 offset, u32 mask, u32 val)
> > +{
> > +	u32 tmp;
> > +
> > +	tmp = readl(rcar->phy_base + offset);
> > +	tmp &= ~mask;
> > +	tmp |= val;
> > +	writel(tmp, rcar->phy_base + offset);
> > +}
> > +
> > +static int rcar_gen4_pcie_reg_check(struct rcar_gen4_pcie *rcar,
> > +				    u32 offset, u32 mask)
> > +{
> > +	struct dw_pcie *dw = &rcar->dw;
> > +
> > +	if (dw_pcie_readl_dbi(dw, offset) & mask)
> > +		return -EAGAIN;
> 
> What is this function checking actually? It is just a DBI read. Do you expect
> these register accesses to fail?

This function is checking whether the register's value with mask is zero or not.
- If non-zero, return -EAGAIN.
- If zero, return 0. (this is expected value.)

Perhaps, should I change the function name? For example, rcar_gen4_pcie_reg_test_bit()?
According to the datasheet, software needs to write registers again if the register
value(s) is(are) not expected value(s).

> > +
> > +	return 0;
> > +}
> > +
> > +static int rcar_gen4_pcie_download_phy_firmware(struct rcar_gen4_pcie *rcar)
> > +{
> > +	const u32 check_addr[] = { 0x00101018, 0x00101118, 0x00101021, 0x00101121};
> 
> What does this check_addr corresponds to?

I don't know. The datasheet just said that like other magic numbers.
I'll add such a comment here.

> > +	struct dw_pcie *dw = &rcar->dw;
> > +	const struct firmware *fw;
> > +	unsigned int i, timeout;
> > +	u32 data;
> > +	int ret;
> > +
> > +	ret = request_firmware(&fw, RCAR_GEN4_PCIE_FIRMWARE_NAME, dw->dev);
> > +	if (ret) {
> > +		dev_err(dw->dev, "%s: Requesting firmware failed\n", __func__);
> 
> Print the firmware name in the case of error.

I got it.

> But as I said above, please try to hardcode the fw if it is not going to change.
> We do this in other drivers as well.

As I mentioned above, I would like to keep calling this function.

Best regards,
Yoshihiro Shimoda

> - Mani
> 
> > +		return ret;
> > +	}
> > +
> > +	for (i = 0; i < (fw->size / 2); i++) {
> > +		data = fw->data[(i * 2) + 1] << 8 | fw->data[i * 2];
> > +		timeout = 100;
> > +		do {
> > +			dw_pcie_writel_dbi(dw, PRTLGC89, RCAR_GEN4_PCIE_FIRMWARE_BASE_ADDR + i);
> > +			dw_pcie_writel_dbi(dw, PRTLGC90, data);
> > +			if (rcar_gen4_pcie_reg_check(rcar, PRTLGC89, BIT(30)) >= 0)
> > +				break;
> > +			if (!(--timeout)) {
> > +				ret = -ETIMEDOUT;
> > +				goto exit;
> > +			}
> > +			usleep_range(100, 200);
> > +		} while (1);
> > +	}
> > +
> > +	rcar_gen4_pcie_phy_reg_update_bits(rcar, RCAR_GEN4_PCIE_PHY_0f8, BIT(17), BIT(17));
> > +
> > +	for (i = 0; i < ARRAY_SIZE(check_addr); i++) {
> > +		timeout = 100;
> > +		do {
> > +			dw_pcie_writel_dbi(dw, PRTLGC89, check_addr[i]);
> > +			ret = rcar_gen4_pcie_reg_check(rcar, PRTLGC89, BIT(30));
> > +			ret |= rcar_gen4_pcie_reg_check(rcar, PRTLGC90, BIT(0));
> > +			if (ret >= 0)
> > +				break;
> > +			if (!(--timeout)) {
> > +				ret = -ETIMEDOUT;
> > +				goto exit;
> > +			}
> > +			usleep_range(100, 200);
> > +		} while (1);
> > +	}
> > +
> > +	ret = 0;
> > +exit:
> > +	release_firmware(fw);
> > +
> > +	return ret;
> > +}
> > +
> > +static int rcar_gen4_pcie_enable_phy(struct rcar_gen4_pcie *rcar)
> > +{
> > +	struct dw_pcie *dw = &rcar->dw;
> > +	u32 val;
> > +	int ret;
> > +
> > +	val = dw_pcie_readl_dbi(dw, PCIE_PORT_FORCE);
> > +	val |= PORT_FORCE_DO_DESKEW_FOR_SRIS;
> > +	dw_pcie_writel_dbi(dw, PCIE_PORT_FORCE, val);
> > +
> > +	val = readl(rcar->base + PCIEMSR0);
> > +	val |= APP_SRIS_MODE;
> > +	writel(val, rcar->base + PCIEMSR0);
> > +
> > +	rcar_gen4_pcie_phy_reg_update_bits(rcar, RCAR_GEN4_PCIE_PHY_700, BIT(28), 0);
> > +	rcar_gen4_pcie_phy_reg_update_bits(rcar, RCAR_GEN4_PCIE_PHY_700, BIT(20), 0);
> > +	rcar_gen4_pcie_phy_reg_update_bits(rcar, RCAR_GEN4_PCIE_PHY_700, BIT(12), 0);
> > +	rcar_gen4_pcie_phy_reg_update_bits(rcar, RCAR_GEN4_PCIE_PHY_700, BIT(4), 0);
> > +
> > +	rcar_gen4_pcie_phy_reg_update_bits(rcar, RCAR_GEN4_PCIE_PHY_148,
> > +					   GENMASK(23, 22), BIT(22));
> > +	rcar_gen4_pcie_phy_reg_update_bits(rcar, RCAR_GEN4_PCIE_PHY_148,
> > +					   GENMASK(18, 16), GENMASK(17, 16));
> > +	rcar_gen4_pcie_phy_reg_update_bits(rcar, RCAR_GEN4_PCIE_PHY_148,
> > +					   GENMASK(7, 6), BIT(6));
> > +	rcar_gen4_pcie_phy_reg_update_bits(rcar, RCAR_GEN4_PCIE_PHY_148,
> > +					   GENMASK(2, 0), GENMASK(11, 0));
> > +	rcar_gen4_pcie_phy_reg_update_bits(rcar, RCAR_GEN4_PCIE_PHY_1d4,
> > +					   GENMASK(16, 15), GENMASK(16, 15));
> > +	rcar_gen4_pcie_phy_reg_update_bits(rcar, RCAR_GEN4_PCIE_PHY_514, BIT(26), BIT(26));
> > +	rcar_gen4_pcie_phy_reg_update_bits(rcar, RCAR_GEN4_PCIE_PHY_0f8, BIT(16), 0);
> > +	rcar_gen4_pcie_phy_reg_update_bits(rcar, RCAR_GEN4_PCIE_PHY_0f8, BIT(19), BIT(19));
> > +
> > +	val = readl(rcar->base + PCIERSTCTRL1);
> > +	val &= ~APP_HOLD_PHY_RST;
> > +	writel(val, rcar->base + PCIERSTCTRL1);
> > +
> > +	ret = readl_poll_timeout(rcar->phy_base + RCAR_GEN4_PCIE_PHY_0f8, val,
> > +				 !(val & BIT(18)), 100, 10000);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = rcar_gen4_pcie_download_phy_firmware(rcar);
> > +	if (ret)
> > +		return ret;
> > +
> > +	val = readl(rcar->base + PCIERSTCTRL1);
> > +	val |= APP_LTSSM_ENABLE;
> > +	writel(val, rcar->base + PCIERSTCTRL1);
> > +
> > +	return 0;
> > +}
> > +
> >  static void rcar_gen4_pcie_ltssm_control(struct rcar_gen4_pcie *rcar,
> >  					 bool enable)
> >  {
> > @@ -200,6 +363,9 @@ static int rcar_gen4_pcie_common_init(struct rcar_gen4_pcie *rcar)
> >  	if (ret)
> >  		goto err_unprepare;
> >
> > +	if (rcar->drvdata->additional_common_init)
> > +		rcar->drvdata->additional_common_init(rcar);
> > +
> >  	return 0;
> >
> >  err_unprepare:
> > @@ -241,6 +407,10 @@ static void rcar_gen4_pcie_unprepare(struct rcar_gen4_pcie *rcar)
> >
> >  static int rcar_gen4_pcie_get_resources(struct rcar_gen4_pcie *rcar)
> >  {
> > +	rcar->phy_base = devm_platform_ioremap_resource_byname(rcar->pdev, "phy");
> > +	if (IS_ERR(rcar->phy_base))
> > +		return PTR_ERR(rcar->phy_base);
> > +
> >  	/* Renesas-specific registers */
> >  	rcar->base = devm_platform_ioremap_resource_byname(rcar->pdev, "app");
> >
> > @@ -517,6 +687,31 @@ static int r8a779f0_pcie_ltssm_enable(struct rcar_gen4_pcie *rcar)
> >  	return 0;
> >  }
> >
> > +static void rcar_gen4_pcie_additional_common_init(struct rcar_gen4_pcie *rcar)
> > +{
> > +	struct dw_pcie *dw = &rcar->dw;
> > +	u32 val;
> > +
> > +	/*
> > +	 * The SoC manual said the register setting is required. Otherwise,
> > +	 * linkup failed.
> > +	 */
> > +	val = dw_pcie_readl_dbi(dw, PCIE_PORT_LANE_SKEW);
> > +	val &= ~PORT_LANE_SKEW_INSERT_MASK;
> > +	if (dw->num_lanes < 4)
> > +		val |= BIT(6);
> > +	dw_pcie_writel_dbi(dw, PCIE_PORT_LANE_SKEW, val);
> > +
> > +	val = readl(rcar->base + PCIEPWRMNGCTRL);
> > +	val |= APP_CLK_REQ_N | APP_CLK_PM_EN;
> > +	writel(val, rcar->base + PCIEPWRMNGCTRL);
> > +}
> > +
> > +static int rcar_gen4_pcie_ltssm_enable(struct rcar_gen4_pcie *rcar)
> > +{
> > +	return rcar_gen4_pcie_enable_phy(rcar);
> > +}
> > +
> >  static struct rcar_gen4_pcie_drvdata drvdata_r8a779f0_pcie = {
> >  	.ltssm_enable = r8a779f0_pcie_ltssm_enable,
> >  	.mode = DW_PCIE_RC_TYPE,
> > @@ -528,10 +723,14 @@ static struct rcar_gen4_pcie_drvdata drvdata_r8a779f0_pcie_ep = {
> >  };
> >
> >  static struct rcar_gen4_pcie_drvdata drvdata_rcar_gen4_pcie = {
> > +	.additional_common_init = rcar_gen4_pcie_additional_common_init,
> > +	.ltssm_enable = rcar_gen4_pcie_ltssm_enable,
> >  	.mode = DW_PCIE_RC_TYPE,
> >  };
> >
> >  static struct rcar_gen4_pcie_drvdata drvdata_rcar_gen4_pcie_ep = {
> > +	.additional_common_init = rcar_gen4_pcie_additional_common_init,
> > +	.ltssm_enable = rcar_gen4_pcie_ltssm_enable,
> >  	.mode = DW_PCIE_EP_TYPE,
> >  };
> >
> > --
> > 2.25.1
> >
> >
> 
> --
> மணிவண்ணன் சதாசிவம்




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux