v2->v3: - rcar-csi2: Collect v2.2 of [4/11] - adv748x: enum_mbus_code: reduce the number of formats to the ones supported by the HDMI and Analog front ends; - adv748x: enum_mbus_code: enumerate all formats on sink pad; enumerate the active format on the source pad - max9286: Apply the format to all pads to enforce all links to have the same format - max9286: Remove max9286_set_fsync_period() from setup v2->v1: - Remove "media: adv748x-csi2: Initialize subdev format" - Add "media: adv748x-afe: Use 1X16 media bus code" - Tested with CVBS - address comments from Laurent and Niklas A branch is available at https://git.kernel.org/pub/scm/linux/kernel/git/jmondi/linux.git/ jmondi/renesas-drivers-2024-04-23-v6.9-rc5/multistream-prep As a follow-up to the recently sent "media: renesas: rcar-csi2: Support multiple streams" series, this smaller version collects some fixes and implement usage of the subdev active state to simplify the R-Car CSI-2, ADV748x and MAX9286 drivers implementations. Tested with GMSL on Eagle V3M Tested with HDMI on Salvator-X Tested with CVBS on Salvator-X Boot tested on WhiteHawk V4H Jacopo Mondi (11): media: rcar-vin: Fix YUYV8_1X16 handling for CSI-2 media: rcar-csi2: Disable runtime_pm in probe error media: rcar-csi2: Cleanup subdevice in remove() media: rcar-csi2: Use the subdev active state media: adv748x-csi2: Implement enum_mbus_codes media: adv748x-csi2: Validate the image format media: adv748x-csi2: Use the subdev active state media: adv748x-afe: Use 1X16 media bus code media: max9286: Fix enum_mbus_code media: max9286: Use the subdev active state media: max9286: Use frame interval from subdev state drivers/media/i2c/adv748x/adv748x-afe.c | 4 +- drivers/media/i2c/adv748x/adv748x-csi2.c | 145 +++++++++----- drivers/media/i2c/adv748x/adv748x.h | 1 - drivers/media/i2c/max9286.c | 182 +++++++----------- drivers/media/platform/renesas/rcar-csi2.c | 155 +++++++++------ .../platform/renesas/rcar-vin/rcar-dma.c | 16 +- 6 files changed, 271 insertions(+), 232 deletions(-) -- 2.44.0
