Hi Jacopo,
Thank you for the patch.
On Tue, Apr 30, 2024 at 12:39:46PM +0200, Jacopo Mondi wrote:
> Use the frame interval stored in the subdev state instead of storing
> a copy in the driver private structure.
>
> Signed-off-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
> ---
> drivers/media/i2c/max9286.c | 52 ++++++++-----------------------------
> 1 file changed, 11 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
> index 575d8ac8efa1..ae1b73fde832 100644
> --- a/drivers/media/i2c/max9286.c
> +++ b/drivers/media/i2c/max9286.c
> @@ -197,8 +197,6 @@ struct max9286_priv {
> struct v4l2_ctrl *pixelrate_ctrl;
> unsigned int pixelrate;
>
> - struct v4l2_fract interval;
> -
> unsigned int nsources;
> unsigned int source_mask;
> unsigned int route_mask;
> @@ -571,11 +569,14 @@ static void max9286_set_video_format(struct max9286_priv *priv,
> MAX9286_INVVS | MAX9286_HVSRC_D14);
> }
>
> -static void max9286_set_fsync_period(struct max9286_priv *priv)
> +static void max9286_set_fsync_period(struct max9286_priv *priv,
> + struct v4l2_subdev_state *state)
> {
> + struct v4l2_fract *interval;
> u32 fsync;
>
> - if (!priv->interval.numerator || !priv->interval.denominator) {
> + interval = v4l2_subdev_state_get_interval(state, MAX9286_SRC_PAD);
> + if (!interval->numerator || !interval->denominator) {
> /*
> * Special case, a null interval enables automatic FRAMESYNC
> * mode. FRAMESYNC is taken from the slowest link.
> @@ -591,8 +592,8 @@ static void max9286_set_fsync_period(struct max9286_priv *priv)
> * The FRAMESYNC generator is configured with a period expressed as a
> * number of PCLK periods.
> */
> - fsync = div_u64((u64)priv->pixelrate * priv->interval.numerator,
> - priv->interval.denominator);
> + fsync = div_u64((u64)priv->pixelrate * interval->numerator,
> + interval->denominator);
>
> dev_dbg(&priv->client->dev, "fsync period %u (pclk %u)\n", fsync,
> priv->pixelrate);
> @@ -802,7 +803,7 @@ static int max9286_s_stream(struct v4l2_subdev *sd, int enable)
> format = v4l2_subdev_state_get_format(state, source_idx);
>
> max9286_set_video_format(priv, format);
> - max9286_set_fsync_period(priv);
> + max9286_set_fsync_period(priv, state);
>
> /*
> * The frame sync between cameras is transmitted across the
> @@ -871,44 +872,14 @@ static int max9286_s_stream(struct v4l2_subdev *sd, int enable)
> return ret;
> }
>
> -static int max9286_get_frame_interval(struct v4l2_subdev *sd,
> - struct v4l2_subdev_state *sd_state,
> - struct v4l2_subdev_frame_interval *interval)
> -{
> - struct max9286_priv *priv = sd_to_max9286(sd);
> -
> - /*
> - * FIXME: Implement support for V4L2_SUBDEV_FORMAT_TRY, using the V4L2
> - * subdev active state API.
> - */
> - if (interval->which != V4L2_SUBDEV_FORMAT_ACTIVE)
> - return -EINVAL;
> -
> - if (interval->pad != MAX9286_SRC_PAD)
> - return -EINVAL;
You will now return a value for the sink pads. Is that fine ?
> -
> - interval->interval = priv->interval;
> -
> - return 0;
> -}
> -
> static int max9286_set_frame_interval(struct v4l2_subdev *sd,
> - struct v4l2_subdev_state *sd_state,
> + struct v4l2_subdev_state *state,
> struct v4l2_subdev_frame_interval *interval)
> {
> - struct max9286_priv *priv = sd_to_max9286(sd);
> -
> - /*
> - * FIXME: Implement support for V4L2_SUBDEV_FORMAT_TRY, using the V4L2
> - * subdev active state API.
> - */
> - if (interval->which != V4L2_SUBDEV_FORMAT_ACTIVE)
> - return -EINVAL;
> -
> if (interval->pad != MAX9286_SRC_PAD)
> return -EINVAL;
>
> - priv->interval = interval->interval;
> + *v4l2_subdev_state_get_interval(state, interval->pad) = interval->interval;
>
> return 0;
> }
> @@ -966,7 +937,7 @@ static const struct v4l2_subdev_pad_ops max9286_pad_ops = {
> .enum_mbus_code = max9286_enum_mbus_code,
> .get_fmt = v4l2_subdev_get_fmt,
> .set_fmt = max9286_set_fmt,
> - .get_frame_interval = max9286_get_frame_interval,
> + .get_frame_interval = v4l2_subdev_get_frame_interval,
In otder to do so, you need to initialize the interval in the
.init_state() operation.
> .set_frame_interval = max9286_set_frame_interval,
> };
>
> @@ -1148,7 +1119,6 @@ static int max9286_setup(struct max9286_priv *priv)
> max9286_write(priv, 0x69, (0xf & ~priv->route_mask));
>
> max9286_set_video_format(priv, &max9286_default_format);
> - max9286_set_fsync_period(priv);
>
> cfg = max9286_read(priv, 0x1c);
> if (cfg < 0)
--
Regards,
Laurent Pinchart
