Re: [PATCH 03/19] media: adv748x: Use V4L2 streams

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jacopo,

Thank you for the patch.

On Tue, Apr 30, 2024 at 12:39:39PM +0200, Jacopo Mondi wrote:
> Initialize the CSI-2 subdevice with the V4L2_SUBDEV_FL_STREAMS flag
> and initialize a simple routing table by implementing the .init_state()
> operation.
> 
> Signed-off-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
> ---
>  drivers/media/i2c/adv748x/adv748x-csi2.c | 28 ++++++++++++++++++++++--
>  1 file changed, 26 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
> index 60bf1dc0f58b..d929db7e8ef2 100644
> --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> @@ -59,7 +59,30 @@ static int adv748x_csi2_register_link(struct adv748x_csi2 *tx,
>  
>  /* -----------------------------------------------------------------------------
>   * v4l2_subdev_internal_ops
> - *
> + */
> +
> +static int adv748x_csi2_init_state(struct v4l2_subdev *sd,
> +				   struct v4l2_subdev_state *state)
> +{
> +	struct v4l2_subdev_route routes[] = {
> +		{
> +			.sink_pad = ADV748X_CSI2_SINK,
> +			.sink_stream = 0,
> +			.source_pad = ADV748X_CSI2_SOURCE,
> +			.source_stream = 0,
> +			.flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE,
> +		},
> +	};
> +
> +	struct v4l2_subdev_krouting routing = {
> +		.num_routes = ARRAY_SIZE(routes),
> +		.routes = routes,
> +	};
> +
> +	return v4l2_subdev_set_routing(sd, state, &routing);

You need to initialize formats too.

> +}
> +
> +/*
>   * We use the internal registered operation to be able to ensure that our
>   * incremental subdevices (not connected in the forward path) can be registered
>   * against the resulting video path and media device.
> @@ -109,6 +132,7 @@ static int adv748x_csi2_registered(struct v4l2_subdev *sd)
>  }
>  
>  static const struct v4l2_subdev_internal_ops adv748x_csi2_internal_ops = {
> +	.init_state = adv748x_csi2_init_state,

The .init_state() operation needs to be provided along with the call to
v4l2_subdev_init_finalize() in patch 01/19.

>  	.registered = adv748x_csi2_registered,
>  };
>  
> @@ -245,7 +269,7 @@ int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx)
>  		return 0;
>  
>  	adv748x_subdev_init(&tx->sd, state, &adv748x_csi2_ops,
> -			    MEDIA_ENT_F_VID_IF_BRIDGE, 0,
> +			    MEDIA_ENT_F_VID_IF_BRIDGE, V4L2_SUBDEV_FL_STREAMS,
>  			    is_txa(tx) ? "txa" : "txb");
>  
>  	/* Register internal ops for incremental subdev registration */
> -- 
> 2.44.0
> 

-- 
Regards,

Laurent Pinchart




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux