Re: [PATCH v5 01/11] gpio: pca953x: move suspend()/resume() to suspend_noirq()/resume_noirq()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Thomas,

On Tue, Apr 16, 2024 at 3:31 PM Thomas Richard
<thomas.richard@xxxxxxxxxxx> wrote:
> Some IOs can be needed during suspend_noirq()/resume_noirq().
> So move suspend()/resume() to noirq.
>
> Reviewed-by: Andi Shyti <andi.shyti@xxxxxxxxxx>
> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> Signed-off-by: Thomas Richard <thomas.richard@xxxxxxxxxxx>

Thanks for your patch, which is now commit 86eb98127332748f ("gpio:
pca953x: move suspend()/resume() to suspend_noirq()/resume_noirq()")
in i2c-host/i2c/i2c-host.

This patch causes regressions on e.g. Salvator-XS.

    s2idle:

         Freezing user space processes
         Freezing user space processes completed (elapsed 0.006 seconds)
         OOM killer disabled.
         Freezing remaining freezable tasks
         Freezing remaining freezable tasks completed (elapsed 0.003 seconds)
         sd 0:0:0:0: [sda] Synchronizing SCSI cache
         ata1.00: Entering standby power mode
        +i2c-rcar e66d8000.i2c: error -16 : 10000005
        +pca953x 4-0020: Failed to sync GPIO dir registers: -16
        +pca953x 4-0020: Failed to restore register map: -16
        +pca953x 4-0020: PM: dpm_run_callback(): pca953x_resume_noirq
returns -16
        +pca953x 4-0020: PM: failed to resume async noirq: error -16

    s2ram:

         Detected VIPT I-cache on CPU7
         CPU7: Booted secondary processor 0x0000000103 [0x410fd034]
         CPU7 is up
        +i2c-rcar e66d8000.i2c: error -110 : 10000001
        +pca953x 4-0020: Failed to sync GPIO dir registers: -110
        +pca953x 4-0020: Failed to restore register map: -110
        +pca953x 4-0020: PM: dpm_run_callback(): pca953x_resume_noirq
returns -110
        +pca953x 4-0020: PM: failed to resume async noirq: error -110
         usb usb1: root hub lost power or was reset
         ...
         PM: suspend exit
         ata1: link resume succeeded after 1 retries
        -ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
        -sd 0:0:0:0: [sda] Starting disk
        -ata1.00: configured for UDMA/133
        -ata1.00: Entering active power mode
        +ata1: SATA link down (SStatus 0 SControl 300)
        +ata1: link resume succeeded after 1 retries
        +ata1: SATA link down (SStatus 0 SControl 300)
        +ata1: limiting SATA link speed to <unknown>
        +ata1: link resume succeeded after 1 retries
        +ata1: SATA link down (SStatus 0 SControl 3F0)
        +ata1.00: disable device
        +ata1.00: detaching (SCSI 0:0:0:0)
        +sd 0:0:0:0: [sda] Synchronizing SCSI cache
        +sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result:
hostbyte=0x04 driverbyte=DRIVER_OK

    When trying to read from /dev/sda afterwards:

        ata1: link resume succeeded after 1 retries
        ata1: SATA link down (SStatus 0 SControl 3F0)
        ata1.00: disable device
        ata1.00: detaching (SCSI 0:0:0:0)
        device offline error, dev sda, sector 0 op 0x0:(READ) flags
0x80700 phys_seg 4 prio class 0
        device offline error, dev sda, sector 0 op 0x0:(READ) flags
0x0 phys_seg 1 prio class 0
        Buffer I/O error on dev sda, logical block 0, async page read
        sd 0:0:0:0: [sda] Synchronizing SCSI cache
        sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result:
hostbyte=0x04 driverbyte=DRIVER_OK

All issues above are fixed by reverting this commit.

> --- a/drivers/gpio/gpio-pca953x.c
> +++ b/drivers/gpio/gpio-pca953x.c
> @@ -1234,7 +1234,7 @@ static void pca953x_save_context(struct pca953x_chip *chip)
>         regcache_cache_only(chip->regmap, true);
>  }
>
> -static int pca953x_suspend(struct device *dev)
> +static int pca953x_suspend_noirq(struct device *dev)
>  {
>         struct pca953x_chip *chip = dev_get_drvdata(dev);
>
> @@ -1248,7 +1248,7 @@ static int pca953x_suspend(struct device *dev)
>         return 0;
>  }
>
> -static int pca953x_resume(struct device *dev)
> +static int pca953x_resume_noirq(struct device *dev)
>  {
>         struct pca953x_chip *chip = dev_get_drvdata(dev);
>         int ret;
> @@ -1268,7 +1268,8 @@ static int pca953x_resume(struct device *dev)
>         return ret;
>  }
>
> -static DEFINE_SIMPLE_DEV_PM_OPS(pca953x_pm_ops, pca953x_suspend, pca953x_resume);
> +static DEFINE_NOIRQ_DEV_PM_OPS(pca953x_pm_ops,
> +                              pca953x_suspend_noirq, pca953x_resume_noirq);
>
>  /* convenience to stop overlong match-table lines */
>  #define OF_653X(__nrgpio, __int) ((void *)(__nrgpio | PCAL653X_TYPE | __int))
>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux