Re: [PATCH v2 2/2] dt-bindings: serial: renesas,scif: Validate 'interrupts' and 'interrupt-names'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/03/2024 11:18, Lad, Prabhakar wrote:
> Hi Krzysztof,
> 
> Thank you for the review.
> 
> On Thu, Mar 7, 2024 at 1:50 PM Krzysztof Kozlowski
> <krzysztof.kozlowski@xxxxxxxxxx> wrote:
>>
>> On 07/03/2024 12:42, Prabhakar wrote:
>>> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>>>
>>> This commit adds support to validate the 'interrupts' and 'interrupt-names'
>>
>> Please do not use "This commit/patch/change", but imperative mood. See
>> longer explanation here:
>> https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95
>>
> Sure, I will update the description.
> 
>>> properties for every supported SoC. This ensures proper handling and
>>> configuration of interrupt-related properties across supported platforms.
>>>
>>> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>>> ---
>>> v1->v2
>>> * Defined the properties in top-level block instead of moving into
>>>   if/else block for each SoC.
>>> * Used Gen specific callback strings instead of each SoC variant
>>
>> You are sending quite a lot of patchsets touching the same, all in one
>> day. This just adds to the confusion.
>>
> Ok, I'll make it as a single series.
> 
>>> ---
>>>  .../bindings/serial/renesas,scif.yaml         | 90 +++++++++++++------
>>>  1 file changed, 62 insertions(+), 28 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
>>> index af72c3420453..6ba6b6d52208 100644
>>> --- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml
>>> +++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
>>> @@ -83,36 +83,24 @@ properties:
>>>      maxItems: 1
>>>
>>>    interrupts:
>>> -    oneOf:
>>> -      - items:
>>> -          - description: A combined interrupt
>>> -      - items:
>>> -          - description: Error interrupt
>>> -          - description: Receive buffer full interrupt
>>> -          - description: Transmit buffer empty interrupt
>>> -          - description: Break interrupt
>>> -      - items:
>>> -          - description: Error interrupt
>>> -          - description: Receive buffer full interrupt
>>> -          - description: Transmit buffer empty interrupt
>>> -          - description: Break interrupt
>>> -          - description: Data Ready interrupt
>>> -          - description: Transmit End interrupt
>>> +    minItems: 1
>>> +    items:
>>> +      - description: Error interrupt or single combined interrupt
>>
>> That's not correct, your first interrupt can be combined.
>>
> In here we are combining and making a single list hence the
> description is updated as "Error interrupt or single combined
> interrupt". so that we dont have to list the items in the below
> if/else checks. Also when the interrupts are combined we dont specify
> interrupt-names hence in the below check we  set "interrupt-names:
> false"

I know what you did and my comment stands.

Best regards,
Krzysztof





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux