Re: [PATCH v9 09/10] PCI: qcom-ep: Use the generic dw_pcie_ep_linkdown() API to handle LINK_DOWN event

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Mar 04, 2024 at 02:52:21PM +0530, Manivannan Sadhasivam wrote:
> Now that the API is available, let's make use of it. It also handles the
> reinitialization of DWC non-sticky registers in addition to sending the
> notification to EPF drivers.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
>  drivers/pci/controller/dwc/pcie-qcom-ep.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
> index 2fb8c15e7a91..4e45bc4bca45 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
> @@ -640,7 +640,7 @@ static irqreturn_t qcom_pcie_ep_global_irq_thread(int irq, void *data)
>  	if (FIELD_GET(PARF_INT_ALL_LINK_DOWN, status)) {
>  		dev_dbg(dev, "Received Linkdown event\n");
>  		pcie_ep->link_status = QCOM_PCIE_EP_LINK_DOWN;
> -		pci_epc_linkdown(pci->ep.epc);
> +		dw_pcie_ep_linkdown(&pci->ep);
>  	} else if (FIELD_GET(PARF_INT_ALL_BME, status)) {
>  		dev_dbg(dev, "Received BME event. Link is enabled!\n");
>  		pcie_ep->link_status = QCOM_PCIE_EP_LINK_ENABLED;
> 
> -- 
> 2.25.1
> 

Reviewed-by: Niklas Cassel <cassel@xxxxxxxxxx>




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux