Re: RE: RE: [PATCH v2] drm/imagination: DRM_POWERVR should depend on ARCH_K3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Feb 16, 2024 at 8:14 AM Maxime Ripard <mripard@xxxxxxxxxx> wrote:
>
> On Fri, Feb 16, 2024 at 09:13:14AM +0000, Biju Das wrote:
> > Hi Maxime Ripard,
> >
> > > -----Original Message-----
> > > From: Maxime Ripard <mripard@xxxxxxxxxx>
> > > Sent: Friday, February 16, 2024 9:05 AM
> > > Subject: Re: RE: [PATCH v2] drm/imagination: DRM_POWERVR should depend on
> > > ARCH_K3
> > >
> > > On Fri, Feb 16, 2024 at 08:47:46AM +0000, Biju Das wrote:
> > > > Hi Adam Ford,
> > > >
> > > > > -----Original Message-----
> > > > > From: Adam Ford <aford173@xxxxxxxxx>
> > > > > Sent: Thursday, February 15, 2024 11:36 PM
> > > > > Subject: Re: [PATCH v2] drm/imagination: DRM_POWERVR should depend
> > > > > on
> > > > > ARCH_K3
> > > > >
> > > > > On Thu, Feb 15, 2024 at 11:22 AM Adam Ford <aford173@xxxxxxxxx> wrote:
> > > > > >
> > > > > > On Thu, Feb 15, 2024 at 11:10 AM Adam Ford <aford173@xxxxxxxxx>
> > > wrote:
> > > > > > >
> > > > > > > On Thu, Feb 15, 2024 at 10:54 AM Geert Uytterhoeven
> > > > > > > <geert@xxxxxxxxxxxxxx> wrote:
> > > > > > > >
> > > > > > > > Hi Maxime,
> > > > > > > >
> > > > > > > > On Thu, Feb 15, 2024 at 5:18 PM Maxime Ripard
> > > > > > > > <mripard@xxxxxxxxxx>
> > > > > wrote:
> > > > > > > > > On Thu, Feb 15, 2024 at 01:50:09PM +0100, Geert Uytterhoeven
> > > > > wrote:
> > > > > > > > > > Using the Imagination Technologies PowerVR Series 6 GPU
> > > > > > > > > > requires a proprietary firmware image, which is currently
> > > > > > > > > > only available for Texas Instruments K3 AM62x SoCs.  Hence
> > > > > > > > > > add a dependency on ARCH_K3, to prevent asking the user
> > > > > > > > > > about this driver when configuring a kernel without Texas
> > > > > > > > > > Instruments K3
> > > > > Multicore SoC support.
> > > > > > > > >
> > > > > > > > > This wasn't making sense the first time you sent it, and now
> > > > > > > > > that commit log is just plain wrong. We have firmwares for
> > > > > > > > > the G6110, GX6250, GX6650, BXE-4-32, and BXS-4-64 models,
> > > > > > > > > which can be found on (at least) Renesas, Mediatek,
> > > > > > > > > Rockchip, TI and StarFive, so across three
> > > > > > > >
> > > > > > > > I am so happy to be proven wrong!
> > > > > > > > Yeah, GX6650 is found on e.g. R-Car H3, and GX6250 on e.g.
> > > > > > > > R-Car M3-
> > > > > W.
> > > > > > > >
> > > > > > > > > architectures and 5 platforms. In two months.
> > > > > > > >
> > > > > > > > That sounds like great progress, thanks a lot!
> > > > > > > >
> > > > > > > Geert,
> > > > > > >
> > > > > > > > Where can I find these firmwares? Linux-firmware[1] seems to
> > > > > > > > lack all but the original K3 AM62x one.
> > > > > > >
> > > > > > > I think PowerVR has a repo [1], but the last time I checked it,
> > > > > > > the BVNC for the firmware didn't match what was necessary for
> > > > > > > the GX6250 on the RZ/G2M.  I can't remember what the
> > > > > > > corresponding R-Car3 model is.  I haven't tried recently because
> > > > > > > I was told more documentation for firmware porting would be
> > > > > > > delayed until everything was pushed into the kernel and Mesa.
> > > > > > > Maybe there is a better repo and/or newer firmware somewhere else.
> > > > > > >
> > > > > > I should have doubled checked the repo contents before I sent my
> > > > > > last e-mail , but it appears the firmware  [2] for the RZ/G2M,
> > > > > > might be present now. I don't know if there are driver updates
> > > > > > necessary. I checked my e-mails, but I didn't see any
> > > > > > notification, or I would have tried it earlier.  Either way, thank
> > > > > > you Frank for adding it.  I'll try to test when I have some time.
> > > > > >
> > > > >
> > > > > I don't have the proper version of Mesa setup yet, but for what it's
> > > > > worth, the firmware loads without error, and it doesn't hang.
> > > >
> > > > Based on [1] and [2],
> > > >
> > > > kmscube should work on R-Car as it works on RZ/G2L with panfrost as
> > > > earlier version of RZ/G2L which uses drm based on RCar-Du, later changed
> > > to rzg2l-du.
> > >
> > > IIRC, the mesa support isn't there yet for kmscube to start.
> >
> > What about glmark2? I tested glmark2 as well.
>
> It's not really a matter of kmscube itself, but the interaction with the
> compositor entirely. You can run a headless vulkan rendering, but an
> application that renders to a window won't work.

I have made a little progress.  I have Ubuntu running on an RZ/G2M
(Rogue GX6250) with a device tree configuring the GPU and the GPU
loads with firmware.

  powervr fd000000.gpu: [drm] loaded firmware powervr/rogue_4.45.2.58_v1.fw
  powervr fd000000.gpu: [drm] FW version v1.0 (build 6513336 OS)
  [drm] Initialized powervr 1.0.0 20230904 for fd000000.gpu on minor 0

drmdevice lists card0 and renderD128
--- Checking the number of DRM device available ---
--- Devices reported 2 ---
--- Retrieving devices information (PCI device revision is ignored) ---
device[0]
+-> available_nodes 0x05
+-> nodes
|   +-> nodes[0] /dev/dri/card0
|   +-> nodes[2] /dev/dri/renderD128
+-> bustype 0002
|   +-> platform
|       +-> fullname /soc/gpu@fd000000
+-> deviceinfo
    +-> platform
        +-> compatible
                    renesas,r8a774a1-gpu
                    img,img-axe

There is more to this dump, but it seems to repeat. I wanted to show
that it seems like it's trying to work.

I think I need to modify the powervr code in mesa to recognize the
renesas,r8a774a1-gpu and associate it with the rcar-du, but I am not
sure, and I am hoping someone might be able to provide some guidance,
since I think I am missing something somewhere. I modified
pvr_device.c in the mesa driver to attempt do this:

/* This is the list of supported DRM render/display driver configs. */
static const struct pvr_drm_device_config pvr_drm_configs[] = {
   DEF_CONFIG("mediatek,mt8173-gpu", "mediatek-drm"),
   DEF_CONFIG("ti,am62-gpu", "ti,am625-dss"),
   DEF_CONFIG("renesas,r8a774a1-gpu", "rcar-du"),
};

When I run modetest -M rcar-du, I can see the encoders and connectors
and I can display test patterns, so the rcar-du is working.

I built Mesa 24.0.1 with the following options:

meson setup builddir -Dvulkan-drivers=imagination-experimental
-Dimagination-srv=true -Dtools=all -Dgallium-drivers=zink,kmsro,swrast

I have tried to set PVR_I_WANT_A_BROKEN_VULKAN_DRIVER=1 the Mesa
documentation for the powerVR, and I have exported the variable for
VK_ICD_FILENAMES to point to the powervr json file.

when I try to run glmark2-drm, I was expecting the GL reddered to be
the powervr, but it keeps using the
GL_RENDERER:    llvmpipe (LLVM 15.0.7, 128 bits)

I realize this driver is still in its infancy, but I was hoping
someone could give me some guidance to let me know if the work to do
is on the Mesa side or the rcar-du driver side, or something else.

I rebuilt both libdrm and mesa.  While I don't get any errors, I also
don't get the hardware acceleration I was hoping for.

I even tried  PVR_I_WANT_A_BROKEN_VULKAN_DRIVER=1
MESA_LOADER_DRIVER_OVERRIDE=zink MESA_DEBUG=contect glmark2-drm

...but it only renders with llvmpipe

    glmark2 2023.01
=======================================================
    OpenGL Information
    GL_VENDOR:      Mesa
    GL_RENDERER:    llvmpipe (LLVM 15.0.7, 128 bits)
    GL_VERSION:     4.5 (Compatibility Profile) Mesa 24.0.1
    Surface Config: buf=32 r=8 g=8 b=8 a=8 depth=32 stencil=0 samples=0
    Surface Size:   3840x2160 fullscreen


I am not as familiar with the Mesa side, but if I can get this working
to a point where something is rendered, even if it's not 100%
compliant, I'd like to push patches to the kernel and/or Mesa if
necessary.

adam




>
> Maxime





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux