On 2/7/24 3:07 PM, Claudiu wrote: > From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx> > > The 4th argument of ravb_setup_irq() is used to save the IRQ number that > will be further used by the driver code. Not all ravb_setup_irqs() calls > need to save the IRQ number. The previous code used to pass a dummy > variable as the 4th argument in case the IRQ is not needed for further > usage. That is not necessary as the code from ravb_setup_irq() can detect > by itself if the IRQ needs to be saved. Thus, get rid of the code that is > not needed. > > Reported-by: Sergey Shtylyov <s.shtylyov@xxxxxx> > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx> [...] > diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c > index 9521cd054274..e235342e0827 100644 > --- a/drivers/net/ethernet/renesas/ravb_main.c > +++ b/drivers/net/ethernet/renesas/ravb_main.c > @@ -2611,17 +2611,20 @@ static int ravb_setup_irq(struct ravb_private *priv, const char *irq_name, > if (!dev_name) > return -ENOMEM; > > - *irq = platform_get_irq_byname(pdev, irq_name); > + error = platform_get_irq_byname(pdev, irq_name); > flags = 0; > } else { > dev_name = ndev->name; > - *irq = platform_get_irq(pdev, 0); > + error = platform_get_irq(pdev, 0); > flags = IRQF_SHARED; > } > - if (*irq < 0) > - return *irq; > + if (error < 0) > + return error; > > - error = devm_request_irq(dev, *irq, handler, flags, dev_name, ndev); > + if (irq) > + *irq = error; > + > + error = devm_request_irq(dev, error, handler, flags, dev_name, ndev); > if (error) > netdev_err(ndev, "cannot request IRQ %s\n", dev_name); > Thanks for addressing my IRC comment! Tho the naming seems awful. :-) I'd suggest to add a local variable (named e.g, irq_num) and use it to store the result of platform_get_irq[_byname](). [...] MBR, Sergey