From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx> There is no need to de-assert the reset signal on probe as the watchdog is not used prior executing start. Also, the clocks are not enabled in probe (pm_runtime_enable() doesn't do that), thus this is another indicator that the watchdog wasn't used previously like this. Instead, keep the watchdog hardware in its previous state at probe (by default it is in reset state), enable it when it is started and move it to reset state when it is stopped. This saves some extra power when the watchdog is unused. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx> --- Changes in v3: - none Changes in v2: - none drivers/watchdog/rzg2l_wdt.c | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-) diff --git a/drivers/watchdog/rzg2l_wdt.c b/drivers/watchdog/rzg2l_wdt.c index 7bce093316c4..93a49fd0c7aa 100644 --- a/drivers/watchdog/rzg2l_wdt.c +++ b/drivers/watchdog/rzg2l_wdt.c @@ -129,6 +129,10 @@ static int rzg2l_wdt_start(struct watchdog_device *wdev) if (ret) return ret; + ret = reset_control_deassert(priv->rstc); + if (ret) + return ret; + /* Initialize time out */ rzg2l_wdt_init_timeout(wdev); @@ -146,7 +150,9 @@ static int rzg2l_wdt_stop(struct watchdog_device *wdev) struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev); int ret; - rzg2l_wdt_reset(priv); + ret = reset_control_assert(priv->rstc); + if (ret) + return ret; ret = pm_runtime_put(wdev->parent); if (ret < 0) @@ -186,6 +192,12 @@ static int rzg2l_wdt_restart(struct watchdog_device *wdev, clk_prepare_enable(priv->osc_clk); if (priv->devtype == WDT_RZG2L) { + int ret; + + ret = reset_control_deassert(priv->rstc); + if (ret) + return ret; + /* Generate Reset (WDTRSTB) Signal on parity error */ rzg2l_wdt_write(priv, 0, PECR); @@ -236,13 +248,11 @@ static const struct watchdog_ops rzg2l_wdt_ops = { .restart = rzg2l_wdt_restart, }; -static void rzg2l_wdt_reset_assert_pm_disable(void *data) +static void rzg2l_wdt_pm_disable(void *data) { struct watchdog_device *wdev = data; - struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev); pm_runtime_disable(wdev->parent); - reset_control_assert(priv->rstc); } static int rzg2l_wdt_probe(struct platform_device *pdev) @@ -285,10 +295,6 @@ static int rzg2l_wdt_probe(struct platform_device *pdev) return dev_err_probe(&pdev->dev, PTR_ERR(priv->rstc), "failed to get cpg reset"); - ret = reset_control_deassert(priv->rstc); - if (ret) - return dev_err_probe(dev, ret, "failed to deassert"); - priv->devtype = (uintptr_t)of_device_get_match_data(dev); if (priv->devtype == WDT_RZV2M) { @@ -309,9 +315,7 @@ static int rzg2l_wdt_probe(struct platform_device *pdev) priv->wdev.timeout = WDT_DEFAULT_TIMEOUT; watchdog_set_drvdata(&priv->wdev, priv); - ret = devm_add_action_or_reset(&pdev->dev, - rzg2l_wdt_reset_assert_pm_disable, - &priv->wdev); + ret = devm_add_action_or_reset(&pdev->dev, rzg2l_wdt_pm_disable, &priv->wdev); if (ret < 0) return ret; -- 2.39.2