From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx> Hi, This series prepares ravb driver for runtime PM support and adjust the already existing suspend to RAM code to work for RZ/G3S (R9A08G045) SoC. As there are IP versions that switch to module standby when disabling the clocks, and because of module standby IP switches to reset and the register content is lost, to be able to have runtime PM supported for all IP variants, the configuration operations were moved all to ravb_open()/ravb_close() letting the ravb_probe() and ravb_remove() to deal with resource parsing and allocation/free. The ethtool and IOCTL APIs that could have been run asyncronously were adapted to return if the interface is down. As explained in each individual commits description, this should be harmless. Along with it, the series contains preparatory cleanups. The series has been tested on the boards with the following device trees: - r8a7742-iwg21d-q7.dts - r8a774a1-hihope-rzg2m-ex.dts - r9a07g043u11-smarc-rzg2ul.dts - r9a07g054l2-smarc-rzv2l.dts - r9a07g044l2-smarc-rzg2l.dts Thank you, Claudiu Beznea Changes in v4: - changed cover letter title and keep on 15 patches in series to cope with requirement at [1] - add dependency on RESET_CONTROLLER in patch "net: ravb: Make reset controller support mandatory" - use pm_runtime_active() in patch "net: ravb: Move the IRQs get and request in the probe function" - set config more before reading the mac address in patch "net: ravb: Set config mode in ndo_open and reset mode in ndo_close" - collected tags [1] https://www.kernel.org/doc/html/v6.6/process/maintainer-netdev.html#tl-dr Changes in v3: - collected tags - addressed review comments - squashed patch 17/21 ("net: ravb: Keep clock request operations grouped together") from v2 in patch 07/19 ("net: ravb: Move reference clock enable/disable on runtime PM APIs") from v3 - check for ndev->flags & IFF_UP in patch 17/19 and 18/19 instead of checking netif_running() - dropped patch 19/21 ("net: ravb: Do not set promiscuous mode if the interface is down") as the changes there are not necessary as ndev->flags & IFF_UP is already checked at the beginning of __dev_set_rx_mode() - remove code from ravb_open() introduced by patch 20/21 ("net: ravb: Do not apply RX CSUM settings to hardware if the interface is down") from v2 as this is not necessary; driver already takes care of this in ravb_emac_init_rcar() Changes in v2: - rework the driver (mainly, ravb_open() contains now only resource allocation and parsing leaving the settings to ravb_open(); ravb_remove() has been adapted accordingly) to be able to use runtime PM for all IP variants; due to this number of patches increased - adjust previous series to review comments - collected tags - populated driver's own runtime PM ops with enable/disable of reference clock Claudiu Beznea (15): net: ravb: Let IP-specific receive function to interrogate descriptors net: ravb: Rely on PM domain to enable gptp_clk net: ravb: Make reset controller support mandatory net: ravb: Switch to SYSTEM_SLEEP_PM_OPS()/RUNTIME_PM_OPS() and pm_ptr() net: ravb: Use tabs instead of spaces net: ravb: Assert/de-assert reset on suspend/resume net: ravb: Move reference clock enable/disable on runtime PM APIs net: ravb: Move the IRQs get and request in the probe function net: ravb: Split GTI computation and set operations net: ravb: Move delay mode set in the driver's ndo_open API net: ravb: Move DBAT configuration to the driver's ndo_open API net: ravb: Move PTP initialization in the driver's ndo_open API for ccc_gac platorms net: ravb: Set config mode in ndo_open and reset mode in ndo_close net: ravb: Simplify ravb_suspend() net: ravb: Simplify ravb_resume() drivers/net/ethernet/renesas/Kconfig | 1 + drivers/net/ethernet/renesas/ravb.h | 6 +- drivers/net/ethernet/renesas/ravb_main.c | 738 +++++++++++------------ 3 files changed, 352 insertions(+), 393 deletions(-) -- 2.39.2
